Chrysler 200problems, repair costs and recalls
Problems reported across 2011–2017. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
26 documented issues across all years, most serious first.
Engine dies while driving
- What you'll notice
- The engine shuts off without warning, sometimes at highway speed, and the steering and brakes get heavy. It may not restart right away, and there is often no check engine light.
- Why it happens
- No single cause has been confirmed. Owners and shops have found failed crankshaft position sensors, failed cam phasers, a failing TIPM power module and software faults; some cars were helped by a software update.
- What to do
- Keep a note of when it happens and ask the dealer to check for software updates and stored codes. Have the crank sensor and power module tested before replacing the engine computer.
Integrated power module (TIPM) failure
- What you'll notice
- Wipers stuck on or turning on by themselves, horn or lights acting on their own, cranks but won't start, stalling, or the cooling fan not running.
- Why it happens
- The totally integrated power module (the under-hood fuse and relay box with a built-in circuit board) loses internal connections and sends power to the wrong circuits or none at all.
- What to do
- If several unrelated electrical things misbehave, ask the shop to test the TIPM. A new module must be programmed, and parts can take weeks, so order early.
Jerky shifting or slipping (2011-2014)
- What you'll notice
- Jolts or jerks when the car shifts, a slipping feeling with the engine revving, or harsh downshifts when slowing.
- Why it happens
- The four-speed and six-speed automatics in the first-generation 200 can shift harshly from adaptive software problems, worn solenoids or internal wear.
- What to do
- Check the fluid and have the shop look for software updates and do a quick relearn. Get slipping looked at soon to avoid a full rebuild.
Left cylinder head failure and misfires
- What you'll notice
- Check engine light with a misfire (often cylinder 2), rough running and a ticking from the left side of the engine.
- Why it happens
- On early 3.6L Pentastar engines, valve seats in the left cylinder head wear, dropping compression. Chrysler extended the warranty on this head for affected vehicles.
- What to do
- Have the misfire diagnosed and ask a Chrysler dealer whether the extended head warranty still applies to your VIN.
Engine stalls while driving (2015-2017)
- What you'll notice
- The engine shuts off while slowing, turning or cruising, sometimes after the dash lights flicker. Restarting may take several tries, and often no code is stored.
- Why it happens
- This is the most-reported problem on the second-generation 200. Loose wiring at the power distribution center, the power module and engine computer are among the causes found; early 2015 cars were recalled for a faulty power distribution connector.
- What to do
- Check for open recalls first. Write down when it happens and ask the dealer to inspect the power distribution center connections.
Rough, delayed or erratic shifting from the 9-speed automatic
- What you'll notice
- Harsh or late shifts, lurching at low speed, hesitation pulling away, or a Service Transmission message.
- Why it happens
- The nine-speed automatic in the second-generation 200 is known for poor shift quality. Software updates help many cars; some need wiring or control module repairs.
- What to do
- Ask the dealer for the latest transmission software and a shift relearn. If it slips or drops out of gear, stop driving and get it checked.
Transmission can shift to neutral without warning (recall)
- What you'll notice
- The car drops into neutral while driving and may show Service Transmission.
- Why it happens
- Wiring harness crimps for the 9-speed transmission may be poor, so the transmission loses its signal and goes to neutral.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 16V-529. The fix is free.
Covered under recall 16V-529.
Car can roll away in Park (recall)
- What you'll notice
- The car moves after being put in Park.
- Why it happens
- The parking pawl in the 9-speed transmission can be contaminated or its rod can break, so Park may not hold.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 15V-090. The fix is free.
Covered under recall 15V-090.
Power distribution connector can cause stalling (recall)
- What you'll notice
- Intermittent loss of power and stalling.
- Why it happens
- A faulty connector at the power distribution center can lose contact.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 15V-470. The fix is free.
Covered under recall 15V-470.
Driver door wiring can overheat (recall)
- What you'll notice
- Burning smell from the driver door or power window and lock problems.
- Why it happens
- The driver door wiring harness may overheat and melt, creating a fire risk.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 14V-480. The fix is free.
Covered under recall 14V-480.
Rear shock absorber can come loose (recall)
- What you'll notice
- Clunking from the rear and poor handling or braking.
- Why it happens
- A weld on the rear shock absorber may be weak, letting the shock detach.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 14V-392. The fix is free.
Covered under recall 14V-392.
Passenger airbag sensor may be mismatched (recall)
- What you'll notice
- Airbag warning light, or the passenger airbag status light acting oddly.
- Why it happens
- If the seat occupant sensor and cushion foam were not replaced as a set, the passenger airbag may deploy wrongly.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 16V-114. The fix is free.
Covered under recall 16V-114.
Cruise control may not turn off (recall)
- What you'll notice
- Cruise control keeps holding or raising speed after you brake or switch it off.
- Why it happens
- A short circuit in the wiring can stop cruise control from canceling.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 18V-332. The fix is free.
Covered under recall 18V-332.
Steering fasteners may be loose (recall)
- What you'll notice
- Loose or vague steering, or clunks over bumps.
- Why it happens
- Some chassis fasteners on cars built in late May 2016 were not tightened enough.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 16V-589. The fix is free.
Covered under recall 16V-589.
Airbags and seat belt pretensioners may not deploy (recall)
- What you'll notice
- Airbag warning light may come on.
- Why it happens
- The occupant restraint control module can short circuit and stop the front and side airbags and belt pretensioners from working.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 16V-668. The fix is free.
Covered under recall 16V-668.
Active head restraints may not deploy (recall)
- What you'll notice
- Usually no symptoms.
- Why it happens
- A part in the restraint control module can fail, so the front active head restraints may not move forward in a rear crash.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 13V-282. The fix is free.
Covered under recall 13V-282.
Steering column rivet may be missing (recall)
- What you'll notice
- Usually no symptoms; possibly a loose steering column.
- Why it happens
- A pivot rivet in the steering column may be missing or installed wrong, weakening the column in a crash.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 11V-315. The fix is free.
Covered under recall 11V-315.
Connecting rod bearings can fail from debris (recall)
- What you'll notice
- Knocking from the engine, low oil pressure, or engine seizure.
- Why it happens
- Debris left in some 3.6L engines built in early September 2011 can ruin the rod bearings.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 11V-487. The fix is free.
Covered under recall 11V-487.
Fuel tank valve can break and stall the engine (recall)
- What you'll notice
- Stalling or a fuel smell.
- Why it happens
- A broken control valve in the fuel tank can stall the engine or leak fuel.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 13V-043. The fix is free.
Covered under recall 13V-043.
Balance shaft debris can cause loss of oil pressure (recall)
- What you'll notice
- Oil pressure warning, engine noise or stalling.
- Why it happens
- Abrasive debris in the balance shaft bearings of some 2.4L engines can lead to loss of oil pressure.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 13V-552. The fix is free.
Covered under recall 13V-552.
Passenger side heater blows cold
- What you'll notice
- Warm air on the driver side but cool or lukewarm air on the passenger side, weak defrosting, and sometimes a coolant smell.
- Why it happens
- The heater core gets partly blocked by sludge and deposits in the coolant, so only part of it gets hot. Flushing rarely fixes it for long.
- What to do
- Have the coolant level and condition checked first. If the core is clogged, it has to be replaced, which means taking the dash apart.
Oil filter housing leak
- What you'll notice
- Oil drips at the back of the engine, a burning oil smell, and sometimes coolant loss.
- Why it happens
- The plastic oil filter housing and oil cooler on the 3.6L V6 crack or leak at the gaskets.
- What to do
- Have the leak traced. The housing is replaced as an assembly, often with an updated part.
Ticking from worn rocker arms
- What you'll notice
- A ticking or tapping from the top of the engine, sometimes with a misfire code.
- Why it happens
- Rocker arm roller bearings on the 3.6L V6 wear out and can then damage the camshaft.
- What to do
- Have it checked early. Replacing rockers before the cam is damaged costs much less.
Oil consumption
- What you'll notice
- The oil level drops between changes, the low oil light comes on, or blue smoke at start-up.
- Why it happens
- The 2.4L Tigershark four-cylinder can burn oil, often from stuck piston rings.
- What to do
- Check the dipstick every few fill-ups and keep records. Ask the dealer about an oil consumption test and any software or piston ring updates.
Radio software can let hackers reach car systems (recall)
- What you'll notice
- No symptoms.
- Why it happens
- A security hole in the Uconnect radio software could let an outsider access vehicle control systems.
- What to do
- Ask a Chrysler dealer to check your VIN for recall 15V-461. The fix is free.
Covered under recall 15V-461.
Clicking or clacking behind the dash
- What you'll notice
- A repeating click or clack from behind the dashboard, often when starting the car or changing climate settings.
- Why it happens
- The small electric motors (actuators) that move the heating and A/C doors lose their position or skip, sometimes because of a software glitch.
- What to do
- Ask the shop to run an HVAC actuator recalibration. If the noise keeps coming back, the noisy actuator is replaced.
Repair prices for your Chrysler 200
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Diagnose stalling; replace crank sensor or cam phasers, or update software
- Replace and program integrated power module (TIPM)
- Replace heater core (dash removal) and refill coolant
- Software update and relearn, solenoid repair, or transmission replacement
- Replace left cylinder head (3.6L)
- Replace oil filter housing and oil cooler assembly
- Replace rocker arms and lash adjusters, both banks
- Diagnose stalling and repair power distribution connections
- Transmission software update, relearn or wiring repair
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free recall repair by a Chrysler dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.