Home › Chrysler › 200 › 2013
My vehicle

Your 2013 Chrysler 200problems, repair costs and recalls

What we've documented about the 2013 Chrysler 200: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 2013128 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 5,000–8,000 miles or when the oil indicator says
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–50,000 miles
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 40,000–70,000 miles
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plug replacementAbout every 100,000 miles · The 2.4L four-cylinder is about an hour; the 3.6L V6 rear plugs need the upper intake removed.
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 5–10 years or 100,000–150,000 miles
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2013 Chrysler 200

12 documented issues apply to 2013, most serious first.

Stop soon2011–2013Engine

Engine dies while driving

What you'll notice
The engine shuts off without warning, sometimes at highway speed, and the steering and brakes get heavy. It may not restart right away, and there is often no check engine light.
Why it happens
No single cause has been confirmed. Owners and shops have found failed crankshaft position sensors, failed cam phasers, a failing TIPM power module and software faults; some cars were helped by a software update.
What to do
Keep a note of when it happens and ask the dealer to check for software updates and stored codes. Have the crank sensor and power module tested before replacing the engine computer.
Repair costInsufficient verified pricing for this vehicle and repair
Diagnose stalling; replace crank sensor or cam phasers, or update software. Prepare an itemized shop request.
Walk through this symptom: Engine stalls while driving →
Stop soon2011–2014Electrical

Integrated power module (TIPM) failure

What you'll notice
Wipers stuck on or turning on by themselves, horn or lights acting on their own, cranks but won't start, stalling, or the cooling fan not running.
Why it happens
The totally integrated power module (the under-hood fuse and relay box with a built-in circuit board) loses internal connections and sends power to the wrong circuits or none at all.
What to do
If several unrelated electrical things misbehave, ask the shop to test the TIPM. A new module must be programmed, and parts can take weeks, so order early.
Repair costInsufficient verified pricing for this vehicle and repair
Replace and program integrated power module (TIPM). Prepare an itemized shop request.
Stop soon2011–2014Transmission

Jerky shifting or slipping (2011-2014)

What you'll notice
Jolts or jerks when the car shifts, a slipping feeling with the engine revving, or harsh downshifts when slowing.
Why it happens
The four-speed and six-speed automatics in the first-generation 200 can shift harshly from adaptive software problems, worn solenoids or internal wear.
What to do
Check the fluid and have the shop look for software updates and do a quick relearn. Get slipping looked at soon to avoid a full rebuild.
Repair costInsufficient verified pricing for this vehicle and repair
Software update and relearn, solenoid repair, or transmission replacement. Prepare an itemized shop request.
Walk through this symptom: Harsh or late shifting →
Stop soon2011–2013Engine3.6L V6 (Pentastar)

Left cylinder head failure and misfires

What you'll notice
Check engine light with a misfire (often cylinder 2), rough running and a ticking from the left side of the engine.
Why it happens
On early 3.6L Pentastar engines, valve seats in the left cylinder head wear, dropping compression. Chrysler extended the warranty on this head for affected vehicles.
What to do
Have the misfire diagnosed and ask a Chrysler dealer whether the extended head warranty still applies to your VIN.
Repair costInsufficient verified pricing for this vehicle and repair
Replace left cylinder head (3.6L). Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Stop soon2011–2014Safety

Airbags and seat belt pretensioners may not deploy (recall)

What you'll notice
Airbag warning light may come on.
Why it happens
The occupant restraint control module can short circuit and stop the front and side airbags and belt pretensioners from working.
What to do
Ask a Chrysler dealer to check your VIN for recall 16V-668. The fix is free.
Typical repair costNo charge if your vehicle is in the recall
Free recall repair by a Chrysler dealer
Covered under recall 16V-668.
Stop soon2011–2013Safety

Active head restraints may not deploy (recall)

What you'll notice
Usually no symptoms.
Why it happens
A part in the restraint control module can fail, so the front active head restraints may not move forward in a rear crash.
What to do
Ask a Chrysler dealer to check your VIN for recall 13V-282. The fix is free.
Typical repair costNo charge if your vehicle is in the recall
Free recall repair by a Chrysler dealer
Covered under recall 13V-282.
Stop soon2013Fuel

Fuel tank valve can break and stall the engine (recall)

What you'll notice
Stalling or a fuel smell.
Why it happens
A broken control valve in the fuel tank can stall the engine or leak fuel.
What to do
Ask a Chrysler dealer to check your VIN for recall 13V-043. The fix is free.
Typical repair costNo charge if your vehicle is in the recall
Free recall repair by a Chrysler dealer
Covered under recall 13V-043.
Walk through this symptom: Engine stalls while driving →
Stop soon2013Engine2.4L 4-cylinder

Balance shaft debris can cause loss of oil pressure (recall)

What you'll notice
Oil pressure warning, engine noise or stalling.
Why it happens
Abrasive debris in the balance shaft bearings of some 2.4L engines can lead to loss of oil pressure.
What to do
Ask a Chrysler dealer to check your VIN for recall 13V-552. The fix is free.
Typical repair costNo charge if your vehicle is in the recall
Free recall repair by a Chrysler dealer
Covered under recall 13V-552.
Walk through this symptom: Oil pressure light on →
Get checked2011–2013HVAC

Passenger side heater blows cold

What you'll notice
Warm air on the driver side but cool or lukewarm air on the passenger side, weak defrosting, and sometimes a coolant smell.
Why it happens
The heater core gets partly blocked by sludge and deposits in the coolant, so only part of it gets hot. Flushing rarely fixes it for long.
What to do
Have the coolant level and condition checked first. If the core is clogged, it has to be replaced, which means taking the dash apart.
Repair costInsufficient verified pricing for this vehicle and repair
Replace heater core (dash removal) and refill coolant. Prepare an itemized shop request.
Walk through this symptom: Heater blows cold air →
Get checked2011–2017Engine3.6L V6 (Pentastar)

Oil filter housing leak

What you'll notice
Oil drips at the back of the engine, a burning oil smell, and sometimes coolant loss.
Why it happens
The plastic oil filter housing and oil cooler on the 3.6L V6 crack or leak at the gaskets.
What to do
Have the leak traced. The housing is replaced as an assembly, often with an updated part.
Repair costInsufficient verified pricing for this vehicle and repair
Replace oil filter housing and oil cooler assembly. Prepare an itemized shop request.
Walk through this symptom: Engine oil leak →
Get checked2011–2017Engine3.6L V6 (Pentastar)

Ticking from worn rocker arms

What you'll notice
A ticking or tapping from the top of the engine, sometimes with a misfire code.
Why it happens
Rocker arm roller bearings on the 3.6L V6 wear out and can then damage the camshaft.
What to do
Have it checked early. Replacing rockers before the cam is damaged costs much less.
Repair costInsufficient verified pricing for this vehicle and repair
Replace rocker arms and lash adjusters, both banks. Prepare an itemized shop request.
Walk through this symptom: Engine ticking or tapping →
Monitor2011–2017HVAC

Clicking or clacking behind the dash

What you'll notice
A repeating click or clack from behind the dashboard, often when starting the car or changing climate settings.
Why it happens
The small electric motors (actuators) that move the heating and A/C doors lose their position or skip, sometimes because of a software glitch.
What to do
Ask the shop to run an HVAC actuator recalibration. If the noise keeps coming back, the noisy actuator is replaced.
Price guide

Repair prices for your 2013 Chrysler 200

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Diagnose stalling; replace crank sensor or cam phasers, or update software
  • Replace and program integrated power module (TIPM)
  • Replace heater core (dash removal) and refill coolant
  • Software update and relearn, solenoid repair, or transmission replacement
  • Replace left cylinder head (3.6L)
  • Replace oil filter housing and oil cooler assembly
  • Replace rocker arms and lash adjusters, both banks

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Free recall repair by a Chrysler dealerNo charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2013 Chrysler 200
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2013 Chrysler 200 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.