Your 1997 Chrysler Concordeproblems, repair costs and recalls
What we've documented about the 1997 Chrysler Concorde: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1997 Chrysler Concorde
6 documented issues apply to 1997, most serious first.
Automatic transmission slipping, harsh shifting or failure
- What you'll notice
- Slipping between gears, delayed or harsh shifts, the car stuck in one gear (limp mode), refusal to shift out of first, or no drive at all.
- Why it happens
- The front-drive automatic used in these cars wears internally, and solenoid, servo and torque converter faults are commonly reported. Old or low fluid speeds up the wear.
- What to do
- Check the fluid level and condition and have codes read. Chrysler requires its own ATF+4-type fluid, so make sure the shop uses the right one. A slipping unit usually needs a rebuild or a remanufactured transmission.
Fuel rail can crack and leak (recall)
- What you'll notice
- Fuel smell under the hood or wetness around the fuel injectors.
- Why it happens
- On cars with the 3.5L engine, the fuel rail O-rings can leak or the plastic rail can crack, a fire risk. Chrysler recalled them to reinforce or replace the rail.
- What to do
- If you smell fuel, don't drive the car. Have a dealer check that this recall was done.
Free under the recall if not already done. Ask the dealer to check your VIN for open recalls.
Shifter interlock can let the car roll away (recall)
- What you'll notice
- The shifter can be moved out of Park with the key out, or the key can come out when the shifter is not in Park.
- Why it happens
- The ignition-park interlock in the floor shifter can fail. Chrysler recalled cars to install a new push rod in the shifter.
- What to do
- Always set the parking brake, and have a dealer confirm the recall was completed.
Free under the recall if not already done. Ask the dealer to check your VIN for open recalls.
Steering rack and tie rod wear
- What you'll notice
- Clunking or creaking when turning, especially when cold, loose or wandering steering, a car that won't hold an alignment, or uneven tire wear.
- Why it happens
- Worn steering rack mounting bushings, inner tie rods and the rack itself are among the most reported complaints on these LH-platform cars.
- What to do
- Have the rack mounts and tie rods inspected for play. Worn parts make the car harder to control, so do not put this off. A rack replacement is followed by an alignment.
Stalling or no-start from cam or crank sensor
- What you'll notice
- The engine cranks but won't start, stalls while driving or at a stop, or stumbles, often with a check engine light.
- Why it happens
- A failing camshaft or crankshaft position sensor, or damaged wiring to it, stops the computer from knowing engine position.
- What to do
- Have the codes read. These sensors are inexpensive, but test the wiring and connector too so the problem doesn't come back.
Head gasket failure on older V6 engines
- What you'll notice
- Overheating, coolant loss, white exhaust smoke, or oil and coolant mixing.
- Why it happens
- Owners of high-mileage 1996-1997 LH cars report blown head gaskets, often after the engine has overheated.
- What to do
- Stop driving if it overheats. A cooling system pressure test and combustion leak test will confirm it.
Repair prices for your 1997 Chrysler Concorde
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace automatic transmission with remanufactured unit
- Replace power steering rack and pinion, then align
- Replace crankshaft or camshaft position sensor
- Replace head gaskets
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Recall repair at a Chrysler dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…