Your 2019 Dodge Challengerproblems, repair costs and recalls
What we've documented about the 2019 Dodge Challenger: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2019 Dodge Challenger
7 documented issues apply to 2019, most serious first.
HEMI tick from failed lifters and worn camshaft
- What you'll notice
- A ticking or tapping from the engine that is loudest after a cold start and rises with engine speed, sometimes with a misfire or check engine light.
- Why it happens
- The small rollers on the valve lifters can stop turning and flatten, then grind into the camshaft lobes. Owners and shops report it on these HEMI engines, often at higher mileage and sometimes sooner.
- What to do
- Have a new tick diagnosed soon. A failed lifter keeps chewing up the camshaft and spreads metal through the oil, so catching it early can save the engine. If there is a flashing check engine light, stop driving and have it towed.
Wrong wheel and brake combination can rub the tire (recall)
- What you'll notice
- Scraping or rubbing from a front wheel, especially when turning, and visible damage on the tire.
- Why it happens
- Some cars were built with a front wheel and brake package that did not match, so parts could contact and damage the tire. Chrysler replaced the wheels and checked tires and alignment.
- What to do
- Check the VIN for this recall. If you hear rubbing from a front wheel, stop driving and have it inspected before the tire fails.
Broken exhaust manifold bolts
- What you'll notice
- A ticking or puffing sound near the back of the engine, loudest when cold and fading as it warms up, sometimes with an exhaust smell.
- Why it happens
- The cast iron manifolds get very hot at the rear and can warp, which snaps the bolts holding them to the cylinder heads, most often the rear bolt on the passenger side. The gap lets exhaust leak out.
- What to do
- Have a mechanic check the manifold bolts before assuming the lifters are bad, since the two sounds are easy to confuse. If the manifold is warped, replacing only the bolts usually does not last.
Oil filter housing and oil cooler leak
- What you'll notice
- Oil (and sometimes coolant) collecting in the valley on top of the engine or dripping at the back of the engine, a burning oil smell, and the oil level dropping between changes.
- Why it happens
- The plastic oil filter housing, which also holds the oil cooler, sits between the cylinder banks where it gets very hot. Over time the plastic can warp or crack and its seals harden and leak.
- What to do
- Check the oil level often and have the housing inspected if you see oil on top of the engine. Do not let the oil run low; if coolant is also being lost, watch the temperature gauge and get it fixed promptly.
Rear differential whine or failure
- What you'll notice
- A whine or howl from the rear of the car, usually between about 45 and 65 mph, a vibration from the back, or clunks when accelerating. In bad cases the car loses drive to the rear wheels.
- Why it happens
- Owners of V8 models, especially the high-powered versions, report worn gears and bearings inside the rear differential. A class-action lawsuit claims the differentials can fail outright.
- What to do
- Have a new rear-end whine checked soon and the differential fluid inspected. If there are loud clunks or grinding, or the car stops pulling, stop driving and have it towed.
Instrument cluster may not show warnings (recall)
- What you'll notice
- Warning messages and lights that should appear on the dash do not show up.
- Why it happens
- A software fault could stop the instrument cluster from displaying some driver warnings. Chrysler updated the cluster software.
- What to do
- Check the VIN for this recall and have the update installed.
Backup camera image may stay on (recall)
- What you'll notice
- The rear camera picture stays on the screen after you shift out of Reverse.
- Why it happens
- A radio software error could leave the camera view displayed, which hides other information and does not meet the federal standard. It was fixed by a software update.
- What to do
- Check the VIN for this recall; the update can be installed by a dealer or over the air.
Repair prices for your 2019 Dodge Challenger
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace camshaft and lifters (HEMI V8)
- Extract broken manifold bolts, replace bolts and gasket
- Replace oil filter housing and oil cooler gaskets
- Replace rear differential assembly
- Replace front wheels or brake parts to the correct spec
- Instrument cluster software update
- Radio software update
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…