Home › GMC › Jimmy › 2000
My vehicle

Your 2000 GMC Jimmyproblems, repair costs and recalls

What we've documented about the 2000 GMC Jimmy: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 2000206 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 3,000–5,000 miles · The 4.3L V6 holds about 4.5 quarts of 5W-30.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–50,000 miles
Price not verified
Ask for an estimate
Rear brake shoes and drumsAbout every 40,000–70,000 miles · Most Jimmys use rear drum brakes.
Price not verified
Ask for an estimate
12V battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plugs (set of 6), plus distributor cap and rotorAbout every 30,000–100,000 miles, depending on plug type · Rear plugs are tight to reach; replace worn plug wires and the cap and rotor at the same time.
Price not verified
Ask for an estimate
Coolant (DEX-COOL) drain and refillAbout every 150,000 miles or 5 years · Keep the coolant fresh and full; old DEX-COOL is linked to intake gasket leaks on this engine.
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2000 GMC Jimmy

20 documented issues apply to 2000, most serious first.

Stop soon1996–2001Transmission

Automatic transmission slips or loses reverse

What you'll notice
The Jimmy hesitates or revs up between gears, slips in first or second, shifts late or harshly, or won't back up at all. A transmission that worked fine when cold may start slipping once it warms up.
Why it happens
The 4L60-E four-speed automatic used in the Jimmy wears internally with age, heat and towing. Common failure points include the reverse input clutch, worn clutch packs and a cracked or worn rear sun shell, which cause slipping and loss of gears.
What to do
Check the fluid level and smell with the engine running and warm. Burnt, dark fluid or metal in the pan means internal wear. Avoid towing or hard acceleration and get a transmission shop diagnosis; a rebuild or a remanufactured unit is the usual fix.
Repair costInsufficient verified pricing for this vehicle and repair
Rebuild or replace 4L60-E automatic transmission. Prepare an itemized shop request.
Walk through this symptom: Transmission slipping →
Stop soon1996–2001Engine4.3L V6 (Vortec)

Intake manifold gaskets leak coolant

What you'll notice
The coolant level keeps dropping with no puddle under the truck, or you see coolant crust near the top of the engine. In bad cases the oil looks milky or the engine overheats.
Why it happens
The 4.3L Vortec uses intake manifold gaskets with plastic carriers that break down from DEX-COOL coolant and heat cycles. Coolant then seeps out externally or into the engine oil, which can ruin the bearings if ignored.
What to do
Keep an eye on the coolant level and check the oil dipstick for a milky look. Have the gaskets replaced with improved metal-frame versions soon, and change the oil afterward if coolant got into it.
Repair costInsufficient verified pricing for this vehicle and repair
Replace intake manifold gaskets and coolant. Prepare an itemized shop request.
Stop soon1996–2001Suspension

Front ball joints wear out

What you'll notice
Clunking or popping from the front end over bumps, wandering steering, or uneven wear on the front tires.
Why it happens
The Jimmy's front ball joints carry a lot of weight and wear out, especially on 4x4 trucks. A badly worn joint can separate and let the wheel fold under.
What to do
Have the front end checked for play at your next tire rotation or sooner if it clunks. Replace worn ball joints promptly and get an alignment afterward.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front lower ball joints (both sides) and align. Prepare an itemized shop request.
Stop soon2000–2001Electrical

Brake lights and hazards can stop working (recall)

What you'll notice
The brake lights or rear hazard flashers stop working, so drivers behind you get no warning when you slow down.
Why it happens
A fault in the turn signal (multifunction) switch can cut power to the brake and hazard lamps. GM recalled the trucks, then recalled some again in 2008.
What to do
Have someone watch the brake lights while you press the pedal. Check your VIN for open recalls; the dealer repair is free.
Typical repair costNo charge if your vehicle is in the recall
Free dealer recall repair
Free at a GMC dealer if not already done.
Stop soon2000–2001Safety

Seat belt buckles may not hold in a crash (recall)

What you'll notice
No warning sign; the buckle may seem latched but not hold properly in a crash.
Why it happens
Some TRW-made buckles did not meet the federal seat belt standard, so GM recalled affected trucks.
What to do
Check your VIN for open recalls and have the buckles replaced free at a GMC dealer if needed.
Typical repair costNo charge if your vehicle is in the recall
Free dealer recall repair
Free at a GMC dealer if not already done.
Stop soon2000Brakes

Brake system seal can leak fluid (recall)

What you'll notice
The brake pedal feels soft or sinks, the brake warning light may come on, and stops take longer.
Why it happens
A seal in the brake system could break during assembly or from road and fluid-pressure cycles, letting brake fluid leak. GM recalled a small number of trucks.
What to do
If the pedal feels soft, have the brakes checked before driving further. Check your VIN for open recalls.
Typical repair costNo charge if your vehicle is in the recall
Free dealer recall repair
Free at a GMC dealer if not already done.
Get checked1996–2001Fuel4.3L V6 (Vortec)

Rough running from the central 'spider' fuel injector

What you'll notice
The engine runs rough or shakes at idle, misfires, or the check engine light comes on with misfire codes. You may notice a fuel smell or a long crank after the truck has sat.
Why it happens
This engine feeds all six cylinders from one central injector unit with thin lines (the 'spider'). The poppet nozzles stick or leak with age, so some cylinders get too little or too much fuel.
What to do
Have a shop read the misfire codes and test fuel pressure and leak-down. If the spider injector is at fault, replace it with the updated multi-port style unit, which fixes the problem for good.
Repair costInsufficient verified pricing for this vehicle and repair
Replace central (spider) fuel injector assembly. Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Get checked1996–2001Fuel

Fuel pump fails and engine won't start

What you'll notice
The engine cranks but won't fire, sputters at highway speed, or stalls and won't restart. You may not hear the usual hum from the fuel tank when you turn the key on.
Why it happens
The in-tank electric fuel pump wears out, often around 100,000 miles. A clogged fuel filter makes the pump work harder and shortens its life.
What to do
Have the fuel pressure tested before replacing parts. If the pump is weak, replace the pump module and the fuel filter together, and change the filter about every 30,000 miles after that.
Repair costInsufficient verified pricing for this vehicle and repair
Replace in-tank fuel pump module and fuel filter. Prepare an itemized shop request.
Walk through this symptom: Car won't start →
Get checked1996–2001Brakes

ABS light on from failed brake control module

What you'll notice
The ABS warning light stays on. The regular brakes still work, but the anti-lock system is switched off, so the wheels can lock on slippery roads.
Why it happens
The electronic brake control module that runs the ABS fails internally on these trucks. A bad wheel speed sensor or corroded wiring can cause the same light.
What to do
Have the ABS codes read so you don't replace the wrong part. A rebuilt module is a common, cheaper fix; drive carefully in rain and snow until it's repaired.
Repair costInsufficient verified pricing for this vehicle and repair
Replace or rebuild ABS electronic brake control module. Prepare an itemized shop request.
Walk through this symptom: ABS light on →
Get checked1996–2001Engine4.3L V6 (Vortec)

Misfire from worn distributor cap and rotor

What you'll notice
Rough idle, stumbling under acceleration, and a flashing or steady check engine light, often worse in damp weather.
Why it happens
The 4.3L still uses a distributor. The cap and rotor wear and build up carbon tracks, and a loose rotor screw can damage the cap, so spark jumps to the wrong place.
What to do
Replace the cap and rotor (and the plug wires if they are old) with good-quality parts. It's an inexpensive repair that often clears misfires on these engines.
Repair costInsufficient verified pricing for this vehicle and repair
Replace distributor cap, rotor and spark plug wires. Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Get checked1998–2001Electrical

Dashboard gauges stick or stop working

What you'll notice
The speedometer, fuel, temperature or tach needle freezes, drops to zero or reads wrong, sometimes only now and then.
Why it happens
The tiny stepper motors that move the gauge needles in this instrument cluster wear out. It's a common problem across GM's 1998-and-later small trucks and SUVs.
What to do
A cluster repair shop can replace the gauge motors, which costs much less than a new cluster. Don't rely on a stuck temperature or fuel gauge in the meantime.
Repair costInsufficient verified pricing for this vehicle and repair
Rebuild instrument cluster or replace gauge motors. Prepare an itemized shop request.
Get checked1999–2001HVAC

Air conditioning stops blowing cold

What you'll notice
The A/C blows warm or only cools some of the time, and you may hear the compressor clutch clicking on and off.
Why it happens
Owners report A/C compressor and component failures at around 60,000 miles. Leaks at hoses and the condenser also let refrigerant escape.
What to do
Have the system checked for leaks with dye before recharging. If the compressor has failed, the shop should also replace the accumulator and flush the lines so debris doesn't ruin the new one.
Repair costInsufficient verified pricing for this vehicle and repair
Replace A/C compressor, accumulator and recharge. Prepare an itemized shop request.
Walk through this symptom: A/C blows warm air →
Get checked2000–2001Suspension

Front wheel bearing hub fails

What you'll notice
A humming or growling noise that gets louder with speed, a loose feeling in the steering, or the ABS light coming on.
Why it happens
The sealed front hub bearings wear out, especially on 4x4 trucks. The ABS sensor is built into the hub, so a failing bearing can also set the ABS light.
What to do
Have the front hubs checked for play and noise. Replace a worn hub before it gets loose, since a failed bearing can affect steering.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front wheel hub and bearing assembly (one side). Prepare an itemized shop request.
Get checked2000–2001Drivetrain

Four-wheel drive won't engage or clunks out

What you'll notice
The 4WD light flashes or the system won't shift into four-wheel drive, or it drops out of 4WD with a loud clunk.
Why it happens
The push-button 4WD system depends on the transfer case shift motor, the front axle actuator and their wiring. These parts fail or corrode with age.
What to do
Have the 4WD system scanned and the front axle actuator and transfer case motor tested. Don't rely on 4WD in snow until it's confirmed working.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front axle actuator or transfer case shift motor. Prepare an itemized shop request.
Walk through this symptom: 4WD or AWD not engaging →
Get checked2000–2001Brakes

Brakes pulsate from warped front rotors

What you'll notice
The brake pedal or steering wheel shakes when you slow down, especially from highway speed.
Why it happens
The front rotors on these trucks wear unevenly and warp from heat, and owners filed many complaints about brake rotor problems for these years.
What to do
Have the rotors measured. Replacing them with quality rotors and pads, and torquing the wheels properly, usually cures the shake.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front brake pads and rotors. Prepare an itemized shop request.
Monitor1998–2001Fuel

Fuel gauge reads wrong

What you'll notice
The fuel gauge reads empty on a full tank, sticks at one level, or swings around while you drive.
Why it happens
The fuel level sender in the tank wears where its contact rubs, or the gauge motor in the cluster fails.
What to do
Track your fill-ups with the trip meter so you don't run out. A shop can tell whether the sender or the gauge is at fault; the sender is part of the fuel pump module.
Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel level sender or pump module. Prepare an itemized shop request.
Monitor1996–2001HVAC

Heater fan works only on some speeds

What you'll notice
The blower works on high but not on the lower settings, or it quits altogether.
Why it happens
The blower motor resistor burns out, often because an aging blower motor draws too much current.
What to do
Replace the resistor, and the blower motor too if it's noisy or slow. It's a quick job behind the glove box area.
Repair costInsufficient verified pricing for this vehicle and repair
Replace blower motor resistor (and motor if worn). Prepare an itemized shop request.
Monitor1996–2001Engine4.3L V6 (Vortec)

Oil pressure gauge drops or jumps around

What you'll notice
The oil pressure gauge falls to zero or swings around while the engine sounds normal.
Why it happens
The oil pressure sending unit at the back of the engine fails or leaks. Real low oil pressure is much less common, but it must be ruled out.
What to do
Check the oil level first. If the engine is quiet and full of oil, have a mechanical gauge test done; if pressure is fine, replace the sender.
Repair costInsufficient verified pricing for this vehicle and repair
Replace oil pressure sender. Prepare an itemized shop request.
Monitor1996–2001Body

Doors sag and are hard to close

What you'll notice
The doors drop when opened, rub or pop as they latch, and need to be lifted or slammed to close.
Why it happens
The door hinge pins and bushings wear out on these trucks, especially on the heavier driver's door.
What to do
Install a hinge pin and bushing kit. It's inexpensive and stops further wear on the striker and latch.
Repair costInsufficient verified pricing for this vehicle and repair
Replace door hinge pins and bushings (one door). Prepare an itemized shop request.
Monitor2000Fuel

Long crank before the engine starts

What you'll notice
The engine turns over for several seconds before it starts, especially the first start of the day.
Why it happens
Fuel pressure bleeds off overnight, often through a leaking spider injector or a weak check valve in the fuel pump, so the system has to build pressure again before the engine fires.
What to do
Try turning the key to on for a few seconds before cranking. If that helps, ask a shop to run a fuel pressure leak-down test to find the leak.
Repair costInsufficient verified pricing for this vehicle and repair
Fuel pressure leak-down test and repair. Prepare an itemized shop request.
Price guide

Repair prices for your 2000 GMC Jimmy

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Rebuild or replace 4L60-E automatic transmission
  • Replace intake manifold gaskets and coolant
  • Replace central (spider) fuel injector assembly
  • Replace in-tank fuel pump module and fuel filter
  • Replace front lower ball joints (both sides) and align
  • Replace or rebuild ABS electronic brake control module
  • Replace distributor cap, rotor and spark plug wires
  • Rebuild instrument cluster or replace gauge motors
  • Replace fuel level sender or pump module
  • Replace A/C compressor, accumulator and recharge
  • Replace front wheel hub and bearing assembly (one side)
  • Replace front axle actuator or transfer case shift motor
  • Replace front brake pads and rotors
  • Replace blower motor resistor (and motor if worn)
  • Replace oil pressure sender
  • Replace door hinge pins and bushings (one door)
  • Fuel pressure leak-down test and repair

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Free dealer recall repairNo charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2000 GMC Jimmy
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2000 GMC Jimmy as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.