Your 2010 Honda CR-Vproblems, repair costs and recalls
What we've documented about the 2010 Honda CR-V: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2010 Honda CR-V
6 documented issues apply to 2010, most serious first.
Rear frame rust can let a trailing arm break loose (recall 23V-228)
- What you'll notice
- Clunking from the rear, the car pulling or feeling unstable, or heavy rust visible on the rear frame near the suspension.
- Why it happens
- In states that use road salt, de-icing salt can get inside the rear frame and rust it from within. The rear trailing arm mount can weaken and separate, which hurts steering control.
- What to do
- Check for the open recall right away, especially in salt-belt states. Do not keep driving with rear clunks or a wandering feel until the frame has been inspected and repaired.
Free under recall 23V-228. Check your VIN. Badly rusted frames may need major repair.
Automatic transmission bearing can break up
- What you'll notice
- Grinding or growling from the transmission, a check engine light, hard or jerky shifts, and in bad cases the car can creep while in Park or stall.
- Why it happens
- Certain driving patterns overload a bearing race on the secondary shaft inside the automatic transmission until it cracks and the pieces damage the gearbox.
- What to do
- Get it looked at quickly, since a broken bearing can wreck the transmission; the recall fix is a control software update and inspection.
A/C compressor or compressor clutch failure
- What you'll notice
- A/C blows warm, cools only some of the time, or makes a grinding or clicking noise when switched on.
- Why it happens
- The compressor clutch coil can corrode or the clutch gap can open up, and some compressors fail internally. An internal failure can send metal debris through the rest of the A/C system.
- What to do
- Have the A/C diagnosed before replacing parts. A clutch or coil repair is sometimes enough, but after an internal compressor failure the system must be flushed or the new parts can fail too.
Loud rattle for a few seconds on cold start (VTC actuator)
- What you'll notice
- A harsh rattle or grinding noise from the engine for one to three seconds after starting cold, most often in cool weather.
- Why it happens
- The variable valve timing actuator on the camshaft does not hold oil pressure while parked, so it rattles until oil pressure builds. Honda issued a service bulletin to replace the actuator.
- What to do
- Ask a Honda dealer about service bulletin 09-010. Do not ignore it for years, since repeated rattling adds wear to the timing chain.
Excessive oil consumption
- What you'll notice
- The oil level drops noticeably between changes, the low oil light may come on, and spark plugs may foul and cause misfires.
- Why it happens
- Carbon deposits can make the oil control piston rings stick, so oil gets past them and burns. Honda issued a bulletin and extended coverage for affected engines.
- What to do
- Check the dipstick every few fill-ups and keep records of how much oil you add. Ask a Honda dealer about the oil consumption bulletin.
Rear differential groans on tight turns
- What you'll notice
- A groan, moan or shudder from the back of the car when turning sharply at low speed, such as in a parking lot.
- Why it happens
- On all-wheel-drive models the rear differential fluid wears out, and the clutches inside the rear unit start to grab and chatter.
- What to do
- Have the rear differential fluid replaced with Honda's specified fluid. A shop may need to drive figure-eights afterwards to settle the clutches.
Repair prices for your 2010 Honda CR-V
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace A/C compressor, flush system and recharge
- Drain and refill rear differential with Honda fluid
- Replace VTC actuator (cam gear)
- Replace piston rings (engine teardown)
- Rebuild or replace automatic transmission
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Inspect and reinforce rear frameNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…