Your 2011 Hyundai Genesisproblems, repair costs and recalls
What we've documented about the 2011 Hyundai Genesis: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2011 Hyundai Genesis
11 documented issues apply to 2011, most serious first.
Brake control unit corrosion reduces braking (recall)
- What you'll notice
- The brake pedal feels soft or sinks further than usual, stopping takes longer, or the ABS and brake warning lights come on.
- Why it happens
- The factory brake fluid did not protect the hydraulic electronic control unit (the ABS/stability control pump and valve block) from internal corrosion. Corroded valves can reduce braking force. Hyundai recalled sedans built through March 2012 and later extended coverage on this unit to 15 years with unlimited miles.
- What to do
- Treat any soft pedal as urgent and do not drive the car until it is checked. Ask a Hyundai dealer to run your VIN for recall 13V-489 and the control unit warranty extension.
Free under the recall and the 15-year control unit warranty extension. Use only DOT 4 brake fluid afterward.
ABS module can short and catch fire (recall)
- What you'll notice
- Usually no warning at all. Some owners notice a burning smell, smoke from under the hood, or the ABS light coming on, even with the car parked.
- Why it happens
- Brake fluid can leak inside the anti-lock brake module and cause an electrical short, which can start a fire in the engine bay while driving or parked. This covers 2011-2015 Genesis Coupes and 2015-2016 Genesis sedans.
- What to do
- Park outside and away from buildings until the fix is done. Check your VIN for recalls 23V-651 (Coupe) or 21V-160 (sedan); the dealer installs a new fuse for free.
Free at a Hyundai or Genesis dealer.
Brake lights may not work (recall)
- What you'll notice
- Brake lights stay off when you press the pedal, cruise control will not switch off with the brake, the shifter can move out of Park without pressing the brake, or the push-button start acts up.
- Why it happens
- The brake light switch can fail internally, and on some sedans the brake light circuit itself can fail. Hyundai recalled the switch on 2009-2011 sedans and 2010-2011 Coupes, and separately repaired the stop lamp circuit on 2009-2011 sedans.
- What to do
- Have someone confirm your brake lights work. Check your VIN for recalls 13V-113 and 14V-713; both repairs are free.
Free under recall. Out of recall, a brake light switch is a small job of about an hour.
Passenger airbag sensor connector can come loose (recall)
- What you'll notice
- The airbag warning light or passenger airbag status light may act up, often after the passenger seat is moved. (Genesis Coupe.)
- Why it happens
- A connector for the passenger seat occupant sensor can work loose when the seat is moved, so the passenger airbag may deploy with the wrong force in a crash.
- What to do
- Check your VIN for recall 16V-722. Have the airbag light checked if it comes on.
Free under recall.
Car can move if started in gear (recall)
- What you'll notice
- On manual-transmission Coupes, the engine can start and the car can lurch if it is in gear without the clutch pressed.
- Why it happens
- A return spring in the ignition switch can break, which lets the starter work without the clutch interlock doing its job.
- What to do
- Always start the car in neutral with the parking brake set. Check your VIN for recall 24V-562.
Free under recall.
Cam timing (CVVT) codes and timing chain wear
- What you'll notice
- Check engine light with cam timing codes such as P0014 or P0017, rough running, rattle on start-up, or the engine cranking but not starting.
- Why it happens
- On the 2.0T Coupe, the cam phasers (CVVT units), timing chain or tensioner can wear or stick, throwing the cam timing out. Dirty or wrong-grade oil makes it worse.
- What to do
- Do not ignore cam timing codes. Change the oil with the correct grade and have the timing system inspected before the chain skips.
Shudder or rough shifting (6-speed automatic)
- What you'll notice
- A shudder during light acceleration around 50-60 mph, a harsh shift out of Park, the shifter refusing to leave Park, or clunky, slapping shifts.
- Why it happens
- Hyundai issued service bulletins for these early Genesis sedans with transmission computer updates to reduce shudder and clutch-wear compensation, plus a fix for harsh or no shift out of Park.
- What to do
- Have a dealer check for the transmission software updates. Check the fluid level and condition, especially on higher-mileage cars.
Turbo wastegate actuator failure
- What you'll notice
- Loss of power, boost that will not build or overboost codes, a check engine light, and sometimes a rattle from the turbo.
- Why it happens
- Owners of the 2.0T Coupe report the wastegate actuator arm breaking or the boost control solenoid failing, which can mean a new turbo.
- What to do
- Have the boost control system checked. If the actuator arm has broken, stop driving hard so parts do not get pulled into the turbo.
Clutch slave or master cylinder failure
- What you'll notice
- The clutch pedal feels soft or sticks to the floor, the car is hard to shift, or brake fluid leaks near the bell housing or under the dash. (Manual Coupes.)
- Why it happens
- The hydraulic clutch slave and master cylinders are among the most-reported Coupe repairs.
- What to do
- Check the brake/clutch fluid reservoir. If the pedal sinks or fluid is leaking, have the clutch hydraulics replaced and bled.
Water leaks into tail lights
- What you'll notice
- Fog or water pooled inside the tail lights or third brake light, and sometimes bulbs or LEDs failing. (Coupe.)
- Why it happens
- The tail light and third brake light housings and seals can let water in.
- What to do
- Have the lamp seals checked and replaced. Wet lamps can corrode wiring and should be fixed early.
Keyless door handle sensor stops working
- What you'll notice
- The door does not lock or unlock when you touch the handle with the smart key nearby. (Coupe.)
- Why it happens
- The proximity sensor or button in the door handle fails; it is one of the most-reported Coupe repairs.
- What to do
- Use the key fob buttons in the meantime and have the handle sensor diagnosed and replaced.
Repair prices for your 2011 Hyundai Genesis
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Transmission computer update and fluid check
- Replace turbocharger or wastegate actuator / boost control valve
- Replace timing chain, tensioner and cam phasers
- Replace clutch slave cylinder and bleed system
- Reseal or replace tail light housing
- Replace outside door handle with proximity sensor
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Inspect brake control unit, replace if corroded, flush brake fluidNo charge if your vehicle is included
- Install revised ABS module fuseNo charge if your vehicle is included
- Replace brake light switch / repair stop lamp circuitNo charge if your vehicle is included
- Secure occupant sensor connectorNo charge if your vehicle is included
- Replace ignition lock switchNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…