Your 2010 Hyundai Santa Feproblems, repair costs and recalls
What we've documented about the 2010 Hyundai Santa Fe: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2010 Hyundai Santa Fe
4 documented issues apply to 2010, most serious first.
Brake light switch fails (recall)
- What you'll notice
- Brake lights that stay off or stay on, the shifter stuck in Park, cruise control not working, or stability control and check engine lights.
- Why it happens
- The stop lamp switch near the brake pedal can wear or lose contact. That switch also tells the shift lock and other systems when the brakes are pressed. Hyundai recalled the 2007 models and later the 2007-2011 models.
- What to do
- Drivers behind you may not see you braking, so get this fixed promptly. Check your VIN for recalls 09V-122 and 13V-113.
Trailer hitch wiring module can overheat (recall)
- What you'll notice
- Smoke, a burning smell or melted wiring near the rear of the SUV, even when it is parked, or trailer lights acting up.
- Why it happens
- The trailer wiring module used with the tow package could let in moisture or suffer an internal short, which can overheat and start a fire. Hyundai recalled 2007-2008 and 2009-2011 SUVs with these harnesses.
- What to do
- Check your VIN for recalls 08E-055 and 11E-040. Until the repair is done, park outside and unplug the trailer harness.
Misaligned intermediate shaft can wear the transmission (recall)
- What you'll notice
- A grinding or whining noise from the transmission area, then a sudden loss of drive power.
- Why it happens
- An intermediate shaft could be installed out of alignment, which wears the transmission internally until it stops sending power to the wheels. Hyundai recalled affected SUVs.
- What to do
- Do not keep driving with a new grinding noise. Check your VIN for recall 11V-261.
Rod bearing wear on the 2.4L four-cylinder
- What you'll notice
- A knock from the engine that gets faster as you rev it, the oil light, loss of power or stalling.
- Why it happens
- Connecting rod bearings in this engine can wear early and lead to engine seizure. The 2012 models were recalled, and 2010-2012 models were added to an engine settlement with knock-detection software and longer warranty coverage for bearing damage.
- What to do
- Stop driving if you hear a knock. Have a Hyundai dealer check your VIN for recall 20V-746 and the knock-detection software update, which must be done before a failure to keep the extended coverage.
Repair prices for your 2010 Hyundai Santa Fe
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace brake light switch
- Replace trailer hitch wiring harness
- Replace transmission output gear and intermediate shaft
- Replace engine long block
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…