Your 2008 Isuzu Ascenderproblems, repair costs and recalls
What we've documented about the 2008 Isuzu Ascender: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2008 Isuzu Ascender
9 documented issues apply to 2008, most serious first.
Transmission slips or gets stuck in second or third gear
- What you'll notice
- Slipping, flaring revs between shifts, harsh or early shifts, or the truck suddenly staying in one gear (often second or third) with the check engine light on.
- Why it happens
- The Ascender uses GM's 4L60-E four-speed automatic. GM issued bulletins for slipping (code P0757), cold-weather shift problems, and the transmission defaulting to a single gear, sometimes from an electrical short or a failing ignition switch rather than worn parts.
- What to do
- Have the codes read and the fluid checked before agreeing to a rebuild; some cases are wiring or switch faults. If it slips badly or won't shift, drive gently and get it diagnosed soon.
Hard cold starts or rough running from clogged injectors
- What you'll notice
- Long cranking on cold mornings, rough idle, hesitation, or a check engine light.
- Why it happens
- Deposits can clog the fuel injectors. GM issued bulletins for driveability problems caused by clogged injectors.
- What to do
- Ask a shop to test injector flow before replacing other parts. Cleaning or replacing the injectors usually fixes it.
Cracked exhaust manifold
- What you'll notice
- A ticking or louder exhaust noise from the engine, especially when cold.
- Why it happens
- GM issued a bulletin for exhaust manifolds cracking and causing increased exhaust noise.
- What to do
- Have the manifold inspected. Exhaust leaks under the hood can let fumes into the cabin.
Headlights can go out (recall)
- What you'll notice
- The low-beam headlights and daytime running lights stop working.
- Why it happens
- The headlamp driver module can overheat and fail. GM recalled these trucks (15V519000) to replace it.
- What to do
- If the headlights fail, don't drive at night. Check your VIN for the recall.
Free if it was never done. Isuzu no longer sells vehicles in the US; GM dealers usually handle recalls on this GM-built SUV, so call ahead with your VIN.
Blower runs on one speed, quits, or stays on
- What you'll notice
- The fan won't blow on some settings, stops working, or keeps running with the key off.
- Why it happens
- The blower motor control module on GM's midsize SUVs of this era (shared with the TrailBlazer and Envoy) commonly fails.
- What to do
- Replace the blower control module. If the fan stays on with the truck off, unplug it until fixed to save the battery.
Power window pops when going up
- What you'll notice
- A popping noise as a window rises.
- Why it happens
- The plastic guide on the window regulator, shared with the TrailBlazer, rubs against the glass.
- What to do
- GM's fix is a strip of tape on the regulator where it touches the glass; the regulator usually doesn't need replacing.
Steering groans when parking
- What you'll notice
- A groan or shudder through the steering wheel during slow, tight turns.
- Why it happens
- GM released redesigned steering gears for this platform, with a separate part for long-wheelbase models like the seven-passenger Ascender.
- What to do
- Check the power steering fluid level first. If the groan persists, a shop can confirm whether the steering gear needs replacing.
Liftgate glass hard to close or won't lock
- What you'll notice
- The flip-up rear glass won't latch without slamming, or it won't lock and unlock with the key fob.
- Why it happens
- The weather strip around the glass stiffens with age. GM also issued a bulletin for the liftgate glass lock not responding to the fob.
- What to do
- A softer replacement weather strip and shim kit fixes the closing problem. Have the latch and wiring checked for the lock issue.
StabiliTrak light stays on with code C0131
- What you'll notice
- The StabiliTrak (stability control) warning light stays on.
- Why it happens
- GM issued a bulletin for the stability control light with code C0131, which relates to the brake pressure sensor.
- What to do
- Brakes still work, but stability control may not. Have the code read and the sensor diagnosed.
Repair prices for your 2008 Isuzu Ascender
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace 4L60-E automatic transmission with a remanufactured unit
- Clean or replace fuel injectors
- Replace blower motor control module
- Apply anti-noise tape to window regulator; replace regulator motor if it fails
- Replace power steering gear
- Install softer weather strip and shim kit
- Replace exhaust manifold and gasket
- Diagnose stability control code and replace brake pressure sensor
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace headlamp driver moduleNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…