Your 2018 Jeep Wranglerproblems, repair costs and recalls
What we've documented about the 2018 Jeep Wrangler: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2018 Jeep Wrangler
11 documented issues apply to 2018, most serious first.
Death wobble front-end shake
- What you'll notice
- After hitting a bump at speed, the steering wheel and front end shake violently and do not stop until you slow way down.
- Why it happens
- The solid front axle depends on tight steering and suspension parts. Worn or loose track bar bolts and bushings, tie rods, ball joints or a weak steering damper can start a runaway shake. On 2018-2019 models Jeep offered a redesigned steering damper.
- What to do
- Slow down firmly without jerking the wheel. Have the track bar, its bolts and mounts, tie rods, ball joints and steering damper inspected and tightened or replaced before driving at speed again.
Front track bar bracket weld (recall 18V-675)
- What you'll notice
- Wandering or delayed steering, a clunk from the driver-side front frame area, or a visible crack at the bracket.
- Why it happens
- Some brackets that hold the front track bar to the frame were not welded properly and can separate.
- What to do
- Check for open recalls by VIN and avoid off-road use until it is inspected.
Manual clutch overheating (recalls)
- What you'll notice
- A clutch overheat warning, a burning smell after slow off-road or stop-and-go driving, or slipping or juddering when taking off.
- Why it happens
- The clutch pressure plate can overheat and in some cases break apart, risking fire, debris or loss of drive. Recalls added software and, later, a new clutch.
- What to do
- Check recall status. If you see the warning or smell burning, stop and let the clutch cool.
Shifter shows Park when not locked (recall 18V-280)
- What you'll notice
- The Jeep rolls after the shifter is placed in Park.
- Why it happens
- Some early vehicles got an incorrect park-lock rod, so the transmission may not lock even though Park is displayed.
- What to do
- Always set the parking brake and check the VIN for the recall right away.
Cruise control may not cancel (recall 18V-332)
- What you'll notice
- Cruise control keeps the vehicle accelerating or holding speed after you try to cancel it.
- Why it happens
- A software problem could keep cruise control from disengaging.
- What to do
- Do not use cruise control until the VIN is checked and the recall software is installed.
Instrument cluster can go blank (recall 24V-652)
- What you'll notice
- The gauge cluster display goes dark, hiding speed and warning lights.
- Why it happens
- An internal short circuit in the instrument cluster can shut off the display.
- What to do
- Check the VIN for the recall. Drive with care until fixed, since warnings may not show.
Fuse box module (TIPM) causes odd electrical faults
- What you'll notice
- Hard starting or no start, the fuel pump not running, or random problems with the horn, wipers, turn signals or lights.
- Why it happens
- The integrated power module that houses many fuses and relays can develop internal faults.
- What to do
- Have a shop test the module before replacing other parts. Repaired or updated modules are available.
Cracked oil filter and cooler housing
- What you'll notice
- Oil leaking at the top back of the engine, a burning oil smell, coolant loss, or oil and coolant mixing in the reservoir.
- Why it happens
- The plastic housing that holds the oil filter and oil cooler can crack from repeated heat cycles.
- What to do
- Have the leak confirmed and replace the housing with an updated part. Do not let oil drip onto hot exhaust parts.
Loose, wandering steering from the steering gear (TSBs)
- What you'll notice
- Play or a dead spot at center, constant small corrections on the highway, or steering that briefly goes heavy in cold weather.
- Why it happens
- The original aluminum steering gear could develop play, and the power steering pump calibration could lose assist in the cold. Jeep released a steel replacement gear and a software update.
- What to do
- Ask the dealer about the steering gear bulletins and have the steering checked before the play gets worse.
8-speed shift problems and shudder (TSB)
- What you'll notice
- Harsh or missed shifts, a shudder, the transmission not shifting, or a check engine light with gear ratio codes.
- Why it happens
- Jeep issued a service bulletin for gear ratio fault codes and shift complaints on this transmission.
- What to do
- Have the codes read and ask the dealer about the bulletin and any software update.
Coolant leak at the water pump inlet (TSB)
- What you'll notice
- A dropping coolant level, a sweet smell, or coolant residue near the front of the engine.
- Why it happens
- Jeep issued bulletins for coolant leaks at the water pump and its inlet tube fasteners.
- What to do
- Top off with the correct coolant and have the leak checked before the engine overheats.
Repair prices for your 2018 Jeep Wrangler
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace front track bar and inspect steering parts
- Replace TIPM with a rebuilt or new module
- Replace oil filter and cooler housing
- Inspect and repair front track bar frame bracket
- Replace steering gear, reprogram power steering and align (TSB 08-003-21)
- Replace clutch pressure plate and disc
- Repair shifter linkage so Park fully engages
- Reprogram engine computer software
- Update transmission software and relearn shifts
- Replace leaking coolant inlet hose or housing
- Update instrument cluster software
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…