Home › Mazda › 626 › 2000
My vehicle

Your 2000 Mazda 626problems, repair costs and recalls

What we've documented about the 2000 Mazda 626: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 2000141 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 3,000-5,000 miles (follow the owner's manual)
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000-50,000 miles
Price not verified
Ask for an estimate
Rear brake shoes/drums or pads/rotorsAbout every 40,000-70,000 miles · Many 626s use rear drum brakes.
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3-5 years
Price not verified
Ask for an estimate
Spark plugs (and wires)About every 60,000 miles · Owners recommend replacing plug wires at the same time.
Price not verified
Ask for an estimate
Coolant drain and refillFollow the owner's manual (about every 2-3 years on older Mazdas)
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2000 Mazda 626

14 documented issues apply to 2000, most serious first.

Stop soon1996–2002Transmission

Automatic transmission slipping or failing

What you'll notice
Slipping or flaring between gears, harsh or late shifts, a whining noise, the O/D OFF light flashing, or no reverse. Some cars lose drive completely on the road.
Why it happens
The automatic transmissions in these 626s have a poor track record, and many owners and mechanics blame overheating of the fluid for wearing out the internal clutches. Failures are most often reported between about 50,000 and 120,000 miles.
What to do
Check the fluid level and smell right away; dark or burnt fluid is a bad sign. If it is slipping or will not engage, avoid hard driving and have a transmission shop diagnose it before damage gets worse.
Repair costInsufficient verified pricing for this vehicle and repair
Replace automatic transmission with rebuilt or used unit. Prepare an itemized shop request.
Walk through this symptom: Transmission slipping →
Get checked1998–2002Transmission

O/D OFF light flashing after highway driving

What you'll notice
The O/D OFF light on the dash starts flashing after a long highway drive or in hot weather, and shifting may feel different.
Why it happens
The transmission computer stores a fault code (P1783) when the transmission fluid gets too hot. Mazda issued a service bulletin about this condition. Repeated overheating shortens the life of the transmission.
What to do
Have the code read and the fluid checked and changed if it is dark. Ask about an auxiliary transmission cooler if you tow, drive in heat, or do long highway trips.
Repair costInsufficient verified pricing for this vehicle and repair
Diagnose code and change transmission fluid. Prepare an itemized shop request.
Walk through this symptom: Transmission warning light on →
Get checked1999–2000Brakes

Brake fluid reservoir cap missing vent holes (recall)

What you'll notice
Usually nothing obvious at first; over time the brakes may feel less effective.
Why it happens
Some brake master cylinder reservoir caps were made on a worn tool and lacked vent holes, letting pressure in the reservoir drop and possibly reducing braking. Mazda recalled them (campaign 00V074).
What to do
Have a dealer inspect the reservoir cap and replace it if it is one of the bad ones. It is a quick, free fix.
Typical repair costNo charge if your vehicle is in the recall
Inspect and replace brake reservoir cap under recall
Free at a Mazda dealer. Ask the dealer to check your VIN for open recalls.
Get checked1996–2002Engine

Rough idle or stalling from idle air control valve

What you'll notice
Idle speed that is too low, hunts up and down, surges when the A/C cycles, or the engine stalls when you stop.
Why it happens
The idle air control (bypass air) valve gets dirty or fails with age, so the computer can no longer hold a steady idle. Worn plugs, a weak coil or a vacuum leak can cause similar symptoms.
What to do
Have codes read and the idle air valve tested and cleaned before replacing parts. Rule out vacuum leaks and ignition parts at the same time.
Repair costInsufficient verified pricing for this vehicle and repair
Clean or replace idle air control valve. Prepare an itemized shop request.
Walk through this symptom: Rough idle or shaking when stopped →
Get checked1996–2002Emissions2.5L V6

Low EGR flow code from clogged passages

What you'll notice
Check engine light with an EGR flow code (P0400 or P0401), sometimes with rough idle or pinging under load.
Why it happens
Carbon builds up in the small exhaust gas recirculation passages in the V6 intake, blocking the flow even when the EGR valve itself works.
What to do
Have the EGR valve tested first. If it is fine, the passages need to be cleaned, which means removing the throttle body and intake manifold.
Repair costInsufficient verified pricing for this vehicle and repair
Clean EGR passages and replace intake gaskets. Prepare an itemized shop request.
Get checked1998–2000Engine2.0L 4-cylinder

Rough idle and hesitation with check engine light

What you'll notice
The 4-cylinder idles roughly and hesitates when you accelerate, with the check engine light on.
Why it happens
Mazda released a service bulletin (01500) for this condition on early-built 4-cylinder 626s. Owners also report misfires that come back after plugs and wires are replaced.
What to do
Have a shop read the codes and check for the bulletin. Also check plugs, wires, coil and vacuum hoses.
Repair costInsufficient verified pricing for this vehicle and repair
Diagnose, apply bulletin repair, replace plugs and wires as needed. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Get checked1996–2002Cooling

Water pump leak

What you'll notice
Coolant drips from the front of the engine, a sweet smell, and a coolant level that keeps dropping.
Why it happens
The water pump seal wears out with age. Mazda issued a bulletin on how to inspect these pumps for leaks. The pump sits behind the timing belt, so it is usually replaced with the belt.
What to do
Have the cooling system pressure tested. Replace the pump, timing belt and tensioner together to avoid paying for the same labor twice.
Repair costInsufficient verified pricing for this vehicle and repair
Replace water pump with timing belt and tensioner. Prepare an itemized shop request.
Get checked1996–2002Drivetrain

Clutch pedal sinks and will not release

What you'll notice
On manual-transmission cars, the clutch pedal goes soft or sinks to the floor and the car is hard to put in gear.
Why it happens
The seals inside the clutch master or slave cylinder wear out, so hydraulic pressure leaks away.
What to do
Check the clutch fluid reservoir for low fluid and look for leaks at the cylinders. Rebuilding or replacing the cylinder is usually enough.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch master or slave cylinder and bleed. Prepare an itemized shop request.
Get checked1996–2002Transmission

Shifter can leave Park without pressing the brake

What you'll notice
You can move the shift lever out of Park without your foot on the brake pedal.
Why it happens
The brake shift interlock, which should lock the lever in Park until the brake is pressed, can be disabled by mistake. Mazda issued a bulletin (0400502) covering 1996-2002 626s.
What to do
Have the interlock checked and repaired. Until then, always press the brake firmly before shifting.
Repair costInsufficient verified pricing for this vehicle and repair
Inspect and repair brake shift interlock. Prepare an itemized shop request.
Monitor1996–2002Engine

Vacuum leak causing rough running

What you'll notice
Rough or high idle, hesitation, a hissing sound under the hood, and a check engine light with lean codes.
Why it happens
Rubber vacuum hoses and intake connections harden and crack with age, letting unmetered air into the engine and upsetting the fuel mixture.
What to do
A smoke test quickly finds the leak. Replacing cracked hoses is usually cheap.
Repair costInsufficient verified pricing for this vehicle and repair
Find and replace leaking vacuum hoses. Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Monitor1996–2002Cooling2.5L V6

Coolant reservoir cracks and leaks

What you'll notice
Coolant puddles near the overflow bottle or the level drops with no obvious leak elsewhere.
Why it happens
The plastic coolant reservoir cracks with age and heat. One V6 owner reported replacing it several times.
What to do
Replace the cracked bottle and refill with the right coolant. Check that the radiator cap holds pressure.
Repair costInsufficient verified pricing for this vehicle and repair
Replace coolant reservoir. Prepare an itemized shop request.
Monitor1996–2002Suspension

Groaning from front strut mounts in turns

What you'll notice
A groan, creak or squeak from the front when turning the steering at low speed or over bumps.
Why it happens
The front strut mounts and their bearings wear out, and Mazda also issued a bulletin for steering squeak noises.
What to do
Have the strut mounts and struts inspected. Mounts are usually replaced along with the struts.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front strut mounts and struts. Prepare an itemized shop request.
Monitor1998–2002HVAC

Musty smell from A/C vents

What you'll notice
A musty or mildew smell when the A/C or fan first comes on.
Why it happens
Moisture stays on the A/C evaporator and mold grows on it. Mazda has issued several bulletins on this odor.
What to do
Have the evaporator cleaned and the cabin drain checked. Running the fan without A/C for a few minutes before parking helps.
Repair costInsufficient verified pricing for this vehicle and repair
Clean A/C evaporator and check drain. Prepare an itemized shop request.
Walk through this symptom: Musty smell from vents →
Monitor1998–2000Electrical

Horn not working or stuck on

What you'll notice
The horn does not sound, or it sounds on its own and will not stop.
Why it happens
Mazda issued a service bulletin (00800) for horns that stop working or stay on, related to the horn switch and its circuit.
What to do
If it is stuck on, pull the horn fuse and have the switch and relay checked.
Repair costInsufficient verified pricing for this vehicle and repair
Repair horn switch or replace horn relay. Prepare an itemized shop request.
Price guide

Repair prices for your 2000 Mazda 626

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace automatic transmission with rebuilt or used unit
  • Diagnose code and change transmission fluid
  • Clean or replace idle air control valve
  • Find and replace leaking vacuum hoses
  • Clean EGR passages and replace intake gaskets
  • Diagnose, apply bulletin repair, replace plugs and wires as needed
  • Replace water pump with timing belt and tensioner
  • Replace coolant reservoir
  • Replace clutch master or slave cylinder and bleed
  • Replace front strut mounts and struts
  • Clean A/C evaporator and check drain
  • Repair horn switch or replace horn relay
  • Inspect and repair brake shift interlock

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Inspect and replace brake reservoir cap under recallNo charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2000 Mazda 626
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2000 Mazda 626 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.