Home › Mazda › B-Series › 1999
My vehicle

Your 1999 Mazda B-Seriesproblems, repair costs and recalls

What we've documented about the 1999 Mazda B-Series: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 1999174 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 5,000 miles (follow the owner's manual)
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000-50,000 miles
Price not verified
Ask for an estimate
Rear brake shoes and drumsAbout every 40,000-70,000 miles · These trucks use rear drum brakes; also check wheel cylinders for leaks.
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3-5 years
Price not verified
Ask for an estimate
Spark plug replacementAbout every 60,000-100,000 miles (follow the owner's manual)
Price not verified
Ask for an estimate
Coolant drain and refillFollow the owner's manual (about every 3-5 years)
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1999 Mazda B-Series

17 documented issues apply to 1999, most serious first.

Stop soon1996–2003Electrical

Cruise control switch can overheat and catch fire (recall)

What you'll notice
A burning smell or smoke from the driver side of the engine bay, sometimes even with the truck parked and off.
Why it happens
The cruise control deactivation switch on the brake master cylinder can leak brake fluid inside, then overheat and burn. Mazda recalled affected trucks to add a fused wiring harness (campaigns 07V347 and 09V414).
What to do
Check your VIN for these recalls and have the fused harness installed. If you smell burning, park away from buildings and have it checked.
Typical repair costNo charge if your vehicle is in the recall
Install fused harness on cruise control switch under recall
Free at a Mazda dealer. Ask the dealer to check your VIN for open recalls.
Stop soon1998–1999Engine

Throttle may stick when cruise control is turned off (recall)

What you'll notice
After you turn off or cancel cruise control, the engine does not return to idle and the truck keeps pulling.
Why it happens
The cruise control cable could catch on the speed control servo pulley and hold the throttle open. Mazda recalled about 22,000 trucks built January 1998 to March 1999 to replace the cables (campaign 99V062).
What to do
Do not use cruise control until the recall is done. If the throttle sticks, shift to neutral, brake firmly and pull over.
Typical repair costNo charge if your vehicle is in the recall
Replace cruise control cables under recall
Free at a Mazda dealer. Ask the dealer to check your VIN for open recalls.
Stop soon1996–2009Brakes

Rusted brake lines leaking

What you'll notice
Brake fluid wetness near a wheel or under the truck, a soft or sinking brake pedal, or the brake light on.
Why it happens
Steel brake lines rust through, especially in road-salt states. Brake lines are one of the top repairs owners report.
What to do
If the pedal goes soft, do not drive. Have all lines inspected, since others are usually close to failing too.
Repair costInsufficient verified pricing for this vehicle and repair
Replace rusted brake lines and bleed system. Prepare an itemized shop request.
Walk through this symptom: Brake fluid leak →
Stop soon1997–2009Transmission

Automatic transmission hard shifts or no reverse

What you'll notice
Harsh or delayed shifts, trouble shifting, or reverse stops working.
Why it happens
Owners report automatic transmissions on high-mileage trucks losing reverse and shifting hard as internal parts wear.
What to do
Check fluid level and condition first. Have a transmission shop diagnose it before it fails completely.
Walk through this symptom: Car won't go into gear →
Get checked1996–2009Suspension

Worn ball joints and control arms

What you'll notice
Clunking over bumps, wandering steering, uneven tire wear, or a front end that feels loose.
Why it happens
Ball joints are the most reported repair on these trucks, wearing out along with the control arm bushings and tie rod ends.
What to do
Have the front end checked for play. A badly worn ball joint can separate, so do not put it off.
Repair costInsufficient verified pricing for this vehicle and repair
Replace ball joints (one side). Prepare an itemized shop request.
Get checked1996–2009Suspension

Front wheel bearing noise

What you'll notice
A humming or grinding noise that rises with speed, sometimes with a wobble or play in the wheel.
Why it happens
The front wheel bearings and hubs wear out, sometimes early when water gets into them.
What to do
Have the wheel checked for play. A failed bearing can lock up or let the wheel wobble.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front wheel bearing or hub assembly. Prepare an itemized shop request.
Walk through this symptom: Humming noise at speed →
Get checked1996–2009Body

Rusted frame and leaf spring hangers

What you'll notice
Clunks from the rear, the bed sitting crooked, or visible rust and flaking around the rear spring shackles and frame.
Why it happens
Owners report rotted rear leaf spring shackles, brackets and frame sections on these trucks, mostly in rust-belt states.
What to do
Have the frame and spring mounts inspected from underneath. Badly rotted mounts can fail and need welding or replacement.
Get checked1996–2009Fuel

In-tank fuel pump failure

What you'll notice
The truck cranks but will not start, or it sputters and dies, especially when hot or low on fuel.
Why it happens
The electric fuel pump inside the tank wears out. It is among the commonly reported repairs.
What to do
Listen for the pump hum when you turn the key, and have fuel pressure tested before replacing it.
Repair costInsufficient verified pricing for this vehicle and repair
Replace in-tank fuel pump assembly. Prepare an itemized shop request.
Get checked1996–2009Drivetrain

Clutch slave cylinder leaking

What you'll notice
On manual trucks, the clutch pedal goes soft, sinks, or the truck is hard to shift and grinds.
Why it happens
The clutch slave cylinder leaks. On these trucks it sits inside the bell housing, so the transmission has to come out to replace it.
What to do
Check the clutch fluid level. If it keeps dropping, replace the slave cylinder and usually the clutch at the same time since the labor is the same.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch slave cylinder (and clutch). Prepare an itemized shop request.
Get checked1996–2009Cooling

Radiator leak and overheating

What you'll notice
The temperature gauge rising, coolant under the front of the truck, or steam from the grille.
Why it happens
The radiator develops leaks with age, and hoses and fittings crack.
What to do
Stop if the engine overheats. Have the cooling system pressure tested and the leak fixed.
Repair costInsufficient verified pricing for this vehicle and repair
Walk through this symptom: Engine overheating →
Get checked1996–2009Drivetrain

Driveshaft U-joint wear and clunk

What you'll notice
A clunk when shifting into gear or taking off, or a vibration at speed.
Why it happens
Driveshaft universal joints wear out and the slip joint can dry out.
What to do
Have the U-joints checked for play and greased. A failed U-joint can let the driveshaft drop.
Repair costInsufficient verified pricing for this vehicle and repair
Replace U-joints and grease driveshaft slip joint. Prepare an itemized shop request.
Monitor1996–2009Electrical

Oil pressure gauge erratic or reading wrong

What you'll notice
The oil pressure gauge drops to zero, flickers or reads high while the engine runs normally.
Why it happens
The oil pressure sending unit fails, giving false readings.
What to do
Have real oil pressure checked with a mechanical gauge first. If pressure is fine, replace the sender.
Repair costInsufficient verified pricing for this vehicle and repair
Replace oil pressure sending unit. Prepare an itemized shop request.
Monitor1996–2008Emissions2.5L 4-cylinder / 3.0L V6

Check engine light from EGR valve or DPFE sensor

What you'll notice
Check engine light with an EGR code, rough idle, or pinging when accelerating.
Why it happens
The exhaust gas recirculation valve, its tube, or the pressure sensor that monitors it (DPFE) fails or clogs.
What to do
Have the code read and the DPFE sensor tested; it is often the cheap part at fault.
Repair costInsufficient verified pricing for this vehicle and repair
Replace EGR valve or DPFE sensor. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Monitor1996–2009Drivetrain

Rear differential pinion seal leak

What you'll notice
Gear oil wetness on the front of the rear axle and drips under the truck.
Why it happens
The pinion seal where the driveshaft meets the axle wears out.
What to do
Check the axle oil level and replace the seal before the gears run low on oil.
Repair costInsufficient verified pricing for this vehicle and repair
Replace pinion seal. Prepare an itemized shop request.
Monitor1996–2009HVAC

Blower works only on high or not at all

What you'll notice
The heater and A/C fan works only on the top setting, or not at all.
Why it happens
The blower motor resistor fails, cutting out the lower fan speeds.
What to do
Replace the resistor; if the fan does not run on any speed, have the motor and fuse checked.
Repair costInsufficient verified pricing for this vehicle and repair
Replace blower motor resistor. Prepare an itemized shop request.
Monitor1996–2009HVAC

A/C blowing warm

What you'll notice
The air conditioning blows warm or only cool, and the compressor clutch may not engage.
Why it happens
A/C compressors, clutches, relays and hoses wear out and leak refrigerant with age.
What to do
Have the system leak-tested and the compressor clutch and relay checked before replacing the compressor.
Repair costInsufficient verified pricing for this vehicle and repair
Repair A/C (hose or clutch) or replace compressor. Prepare an itemized shop request.
Walk through this symptom: A/C blows warm air →
Monitor1996–2009Electrical

No-start from worn starter or weak battery

What you'll notice
A click or slow crank when you turn the key, or nothing at all.
Why it happens
Starters and batteries wear out on these trucks; owners report replacing both after no-starts.
What to do
Have the battery and charging system tested first, then the starter.
Repair costInsufficient verified pricing for this vehicle and repair
Walk through this symptom: Car won't start →
Price guide

Repair prices for your 1999 Mazda B-Series

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace ball joints (one side)
  • Replace front wheel bearing or hub assembly
  • Replace rusted brake lines and bleed system
  • Replace in-tank fuel pump assembly
  • Replace clutch slave cylinder (and clutch)
  • Replace radiator
  • Replace oil pressure sending unit
  • Replace EGR valve or DPFE sensor
  • Replace pinion seal
  • Replace U-joints and grease driveshaft slip joint
  • Replace blower motor resistor
  • Repair A/C (hose or clutch) or replace compressor
  • Replace starter

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Install fused harness on cruise control switch under recallNo charge if your vehicle is included
  • Replace cruise control cables under recallNo charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1999 Mazda B-Series
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1999 Mazda B-Series as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.