Your 2003 Mercedes-Benz M-Class / GLEproblems, repair costs and recalls
What we've documented about the 2003 Mercedes-Benz M-Class / GLE: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2003 Mercedes-Benz M-Class / GLE
8 documented issues apply to 2003, most serious first.
Crankshaft pulley (harmonic balancer) separates
- What you'll notice
- A wobble or chirp from the front of the engine, a thrown drive belt, then loss of charging, power steering or cooling.
- Why it happens
- The rubber layer in the crankshaft pulley breaks down with age, letting the outer ring slip or come apart.
- What to do
- Have the pulley checked at every service. Replace it at the first sign of wobble or cracking, before the belt comes off.
Power steering cooler hose can come loose (recall)
- What you'll notice
- Power steering fluid leaking or spraying in the engine bay, a whining pump, or suddenly heavy steering.
- Why it happens
- The clamp on the power steering fluid cooler hose may not grip tightly enough, so the hose can work off.
- What to do
- Have the recall checked with your VIN. If steering gets heavy, slow down and have it towed.
Free at a dealer when the recall is open for your VIN.
Cruise control may not switch off when braking (recall)
- What you'll notice
- Cruise control stays engaged after you tap the brake, particularly if you pump the pedal.
- Why it happens
- Under certain conditions, especially when the brake pedal needs unusually high force, the cruise control might not disengage.
- What to do
- Don't use cruise control until a dealer confirms the recall is done. Turn it off with the switch, and brake firmly.
Free at a dealer when the recall is open for your VIN.
Transmission fluid leaks from the wiring connector
- What you'll notice
- Reddish fluid dripping near the side of the transmission, oil wicking up the wiring harness, or erratic shifting and warning lights.
- Why it happens
- The plug where the wiring enters the transmission is sealed with O-rings that harden and leak. Fluid can travel up the harness toward the control units.
- What to do
- Have the connector and harness inspected. Updated connector seals are inexpensive; do it before fluid reaches the electronics.
Engine stalls when hot from a failing crankshaft sensor
- What you'll notice
- The engine cuts out when warm and won't restart until it cools down, or it cranks without starting.
- Why it happens
- The crankshaft position sensor tells the computer when to fire the spark plugs. When it fails with heat, the engine shuts off.
- What to do
- Have it tested when the problem happens. A new sensor is an inexpensive fix.
Catalytic converters break apart and rattle
- What you'll notice
- A rattle from under the SUV, especially at idle or startup, or a check engine light for catalyst efficiency.
- Why it happens
- The inside of the catalytic converters can crack and break loose with age and heat.
- What to do
- Have the exhaust inspected. A rattling converter usually needs replacement, which is more work on this SUV because suspension parts may need to come off.
Door lock actuators fail and lock buttons jump
- What you'll notice
- Doors that won't lock or unlock with the remote, lock buttons moving up and down by themselves, or a door that won't open.
- Why it happens
- The lock actuator inside the door latch wears out.
- What to do
- Replace the latch assembly in the affected door.
Brake light warning from melted tail lamp sockets
- What you'll notice
- A brake light bulb warning that keeps coming back even after new bulbs, or a brake light that works only some of the time.
- Why it happens
- Heat from the bulb melts the socket in the tail lamp housing, causing a poor connection. Bad grounds cause the same message.
- What to do
- Check the socket for melting or burning. Replacing the tail lamp housing or socket usually solves it.
Repair prices for your 2003 Mercedes-Benz M-Class / GLE
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace transmission connector plug adapter and O-rings, top up fluid
- Replace crankshaft pulley (harmonic balancer)
- Replace crankshaft position sensor
- Replace catalytic converter
- Replace door latch and lock actuator (one door)
- Replace tail lamp housing or socket
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Recall repair at a Mercedes-Benz dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…