Your 2011 Mercedes-Benz SLproblems, repair costs and recalls
What we've documented about the 2011 Mercedes-Benz SL: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2011 Mercedes-Benz SL
11 documented issues apply to 2011, most serious first.
Active Body Control (ABC) suspension leaks and sagging
- What you'll notice
- A corner of the car sinks after it sits for a day or two, an ABC warning appears, the ride turns bouncy or harsh, or you hear a hum from the engine bay at low revs. Red hydraulic fluid may drip under the car.
- Why it happens
- ABC is a high-pressure hydraulic suspension. With age its hoses, seals and struts leak, the gas-filled accumulators lose their charge, the pulsation damper fails, and dirty or low fluid wears the pump.
- What to do
- If the car drops low or shows a red ABC warning, stop and don't drive it. Have a specialist check fluid level and pressure and find the leak. Regular fluid and filter changes help prevent failures.
Electronic brake pump (SBC) wear-out
- What you'll notice
- A brake warning message on the dash, the brake pump buzzing often, or a hard pedal with less braking help. Some owners say the pedal feels soft or sinks.
- Why it happens
- These cars use an electro-hydraulic brake system (Sensotronic Brake Control). Its pump unit is designed for a set number of brake cycles and then needs replacing; some fail early.
- What to do
- Treat any brake warning seriously and get the car checked before driving far. Ask a dealer whether your car is still covered: Mercedes extended coverage on this unit to 25 years with unlimited miles.
Camshaft wear ticking (SL63 AMG)
- What you'll notice
- A ticking noise from the top of the engine on cold starts that slowly gets more persistent.
- Why it happens
- On the 6.2L AMG V8 the camshaft lobes can wear against the harder cam followers.
- What to do
- Have a specialist inspect the camshafts, ideally before buying. Keep up regular oil changes with the correct oil.
Folding hardtop (Vario roof) hydraulic leaks or slow operation
- What you'll notice
- The roof works slowly, stops partway, or won't open; you may see hydraulic fluid on the headliner or in the trunk, wet footwells, rattles or wind noise.
- Why it happens
- The roof's hydraulic rams lose their seals with age, often starting with the front roof latch cylinder. A weak battery or flaps at the rear deck that aren't fully closed can also stop the roof.
- What to do
- Charge or test the battery first, then have a specialist check fluid level and look for leaking rams. Rebuilt rams and seal kits cost much less than new dealer parts.
Intake manifold flap failure
- What you'll notice
- Loss of power, poorer fuel economy, rough idle and a check engine light.
- Why it happens
- Oily carbon from the crankcase ventilation system builds up in the intake manifold, and its plastic flaps and linkages get brittle and break.
- What to do
- Have the codes read. The manifold can be replaced or, in some cases, repaired with a kit.
Ignition coil pack failure (V12)
- What you'll notice
- Misfiring, shaking, loss of power and a flashing check engine light.
- Why it happens
- The V12 uses two large coil packs, each serving six cylinders, and they fail often. The 24 spark plugs also need regular replacement.
- What to do
- Have the misfire codes read. If a coil pack has failed, ask for the updated part and check when the spark plugs were last done.
Engine mounts wearing out quickly (V12)
- What you'll notice
- Clunks when shifting or accelerating and more vibration in the cabin.
- Why it happens
- The twin-turbo V12's high torque wears out its fluid-filled engine mounts, roughly every 40,000 miles. Other R230 engines also wear their mounts, just more slowly.
- What to do
- Have the mounts checked if you notice clunking. On V12 cars the job is big, so get a quote from a specialist first.
Shift lever breaks and leaves car stuck in Park
- What you'll notice
- The gear selector won't move out of Park or feels loose.
- Why it happens
- A plastic part inside the shifter mechanism wears out and breaks.
- What to do
- A shop or skilled owner can fit a stronger metal replacement part. It's worth doing early.
Transmission fluid leaking through electrical plug
- What you'll notice
- Fluid seeping where the wiring plug enters the transmission, then harsh shifts, a stuck gear or no gear selection.
- Why it happens
- The seal on the transmission's electrical connector ages and lets fluid wick up the wiring toward the transmission control unit.
- What to do
- Have the connector seal replaced as soon as you see seepage; it is a cheap fix. Waiting can damage the control unit, which is expensive.
Camshaft adjuster solenoid failure
- What you'll notice
- Check engine light, sometimes with rough running or oil seeping around the round solenoids on the front of the engine.
- Why it happens
- The electric solenoids that control variable valve timing fail with age and can let oil into their connectors.
- What to do
- Have the codes read. The solenoids are fairly cheap; check the wiring plugs for oil while the job is done.
Trunk lid seal leaking water
- What you'll notice
- Water in the trunk after rain or a car wash, sometimes with rust under the seal.
- Why it happens
- The rubber seal along the top of the trunk lets water in after several years.
- What to do
- Clean out any rust and refit the seal with proper sealant; just replacing the rubber may not stop it.
Repair prices for your 2011 Mercedes-Benz SL
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace leaking ABC strut, accumulators or valve block
- Replace SBC hydraulic brake unit
- Reseal or replace leaking roof hydraulic rams
- Replace intake manifold assembly
- Replace one V12 coil pack
- Replace V12 engine mounts
- Rebuild shifter with aluminum shift lever repair kit
- Replace and reseal trunk lid rubber seal
- Replace camshaft adjuster solenoid(s)
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…