Your 1999 Mercury Mystiqueproblems, repair costs and recalls
What we've documented about the 1999 Mercury Mystique: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1999 Mercury Mystique
19 documented issues apply to 1999, most serious first.
Automatic transmission loses forward gears
- What you'll notice
- The car revs but will not move in Drive, pulls away weakly, or slips and bangs between gears. Reverse may still work.
- Why it happens
- The CD4E automatic in these cars has several Ford bulletins for lost forward engagement, including a snap ring that can work out of place and internal failures serious enough that Ford added units to its remanufactured exchange program.
- What to do
- Check the transmission fluid level and smell. If the car will not move or keeps slipping, stop driving it and have it towed for a transmission diagnosis; a rebuild or used unit is the usual fix.
Water pump leak or failure and overheating
- What you'll notice
- Coolant drips near the front of the engine, a sweet smell, the temperature gauge climbing, or a growling noise from the pump.
- Why it happens
- Ford issued bulletins for broken or leaking water pumps on these engines and a notice that the pump bearing can work loose. Once the pump leaks, the engine can overheat quickly.
- What to do
- If the gauge rises toward hot, pull over and shut the engine off. Do not open a hot radiator cap. Have the cooling system pressure-tested and the pump replaced before driving far.
Rear brakes can lock up from a corroded valve (recall)
- What you'll notice
- The rear wheels lock or skid during firm braking, and the car may feel unstable or want to swing around.
- Why it happens
- The rear brake pressure control valves can corrode and stop limiting rear brake pressure. If both fail, the rear wheels can lock.
- What to do
- Drive gently and leave extra stopping room. Have a dealer check whether the valve recall was done on your car.
Timing belt shredding (2.0L)
- What you'll notice
- A slapping or scraping noise from the timing belt cover, or the engine suddenly quits and will not restart.
- Why it happens
- Ford found the 2.0L timing belt could shred or rub against its front cover. If the belt breaks, the engine stops and may be damaged.
- What to do
- If you hear noise from the timing cover, have the belt inspected right away. Replace it on schedule if there is no record.
Manual transmission differential failure (V6)
- What you'll notice
- Grinding or banging from the transmission, or the car will not move even though the engine runs and the clutch works.
- Why it happens
- Ford found the differential gears in the V6 manual transmission could fail.
- What to do
- Stop driving if it grinds or will not move. A tow and a transmission repair or replacement are usually needed.
Ignition and Park interlock problem (recall)
- What you'll notice
- The key may come out or the car may not be fully secured in Park when you expect it to be.
- Why it happens
- Ford recalled some 1999 cars for not meeting the federal rule on theft protection and rollaway prevention, which governs when the key can be removed.
- What to do
- Always set the parking brake and confirm Park before leaving the car. Ask a dealer whether this recall was completed.
Check engine light from clogged EGR passages
- What you'll notice
- The check engine light comes on, sometimes with pinging or a slight loss of power. Codes point to low EGR flow.
- Why it happens
- Carbon builds up in the exhaust gas recirculation passages and tubes, so the system cannot flow enough exhaust back into the engine.
- What to do
- Have the codes read. Cleaning the EGR passages usually fixes it; the EGR valve or pressure sensor sometimes needs replacing too.
Rough idle and stalling at idle
- What you'll notice
- Hard cold starts, a rough or hunting idle, stalling when you come to a stop, or a hooting noise when slowing down.
- Why it happens
- The idle air bypass valve gets dirty or wears out, so the engine cannot hold a steady idle. Ford has bulletins for cold stalls and for noise from this valve.
- What to do
- Have the idle air valve and throttle body cleaned or replaced, and check for vacuum leaks at the same time.
Lean codes from vacuum leaks
- What you'll notice
- Check engine light with lean codes (P0171 or P0174), a rough idle, or hesitation.
- Why it happens
- Air sneaks into the engine through cracked vacuum hoses or intake gaskets, which upsets the fuel mixture.
- What to do
- Ask the shop to smoke-test the intake for leaks before replacing sensors.
Shifter stuck in Park with the brake pressed
- What you'll notice
- You press the brake but the shifter will not come out of Park, sometimes with a click.
- Why it happens
- The brake-shift interlock or the brake light circuit can fail, so the car does not know the brake is pressed.
- What to do
- Check whether your brake lights work. Have the interlock and brake light switch tested.
Alternator failure and dead battery
- What you'll notice
- The battery light comes on, lights dim, or the battery keeps going flat.
- Why it happens
- The alternator wears out and stops charging. Owners also report replacing batteries before finding the real cause.
- What to do
- Have the charging system tested before buying another battery.
Anti-theft system prevents starting
- What you'll notice
- The engine will not crank or starts and dies, and the theft light on the dash may flash.
- Why it happens
- The passive anti-theft system (PATS) may not read the key. Magnets or other keys on the ring can interfere, and Ford has bulletins on no-start problems from this system.
- What to do
- Try the engine with the key alone on the ring, then a spare key. If neither works, a shop or locksmith with Ford tools can diagnose and program keys.
Heater core leak
- What you'll notice
- A sweet smell inside, a greasy film on the windshield, damp carpet on the passenger side, or coolant loss.
- Why it happens
- The heater core behind the dashboard can develop leaks. Ford issued a bulletin for heater core leaks.
- What to do
- Have the cooling system pressure-tested. Fix it soon because low coolant can lead to overheating.
Steering wheel shakes when braking
- What you'll notice
- The steering wheel or brake pedal shudders when you slow down from speed.
- Why it happens
- Uneven front rotor wear or thickness variation causes vibration. Ford issued a bulletin on diagnosing brake vibration.
- What to do
- Have the front rotors measured; they may need machining or replacement with new pads.
Front wheel bearing noise
- What you'll notice
- A humming or growling noise that rises with speed and may change when you turn.
- Why it happens
- The front wheel bearings wear out. Ford has a bulletin on noise that seems to come from them.
- What to do
- Have the bearings checked for play. A badly worn bearing can overheat, so do not put it off.
Hard starting in freezing weather (2.0L)
- What you'll notice
- Below freezing, the engine cranks a long time or will not start, and may smell of fuel.
- Why it happens
- The 2.0L can overfuel on cold starts, which floods the engine. Ford released a bulletin for this.
- What to do
- Ask a shop to check for the cold-start bulletin and any engine computer update.
Power steering moan when turning
- What you'll notice
- A groan or moan from the power steering, often when coming back from a right turn.
- Why it happens
- Ford found power steering noise on these cars, including on the 2.5L V6.
- What to do
- Check the power steering fluid level and look for leaks. Ask the shop about the bulletin repair.
Water leaking onto the front floor
- What you'll notice
- Wet carpet on the front floor after rain or a car wash.
- Why it happens
- Water can get past the plastic shield behind the door trim panel.
- What to do
- Have the door water shield resealed. Dry the carpet to prevent mold.
Temperature gauge reads high when the engine is not hot
- What you'll notice
- The gauge sits higher than normal even though the engine is not overheating.
- Why it happens
- Ford issued bulletins for gauges reading high in the normal range.
- What to do
- Confirm the real engine temperature with a scan tool before assuming it is overheating.
Repair prices for your 1999 Mercury Mystique
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Rebuild or replace automatic transaxle with used or remanufactured unit
- Replace water pump and refill coolant
- Clean EGR passages; replace EGR valve or sensor if needed
- Clean or replace idle air bypass valve
- Smoke test and replace vacuum hose or intake gasket
- Replace timing belt and tensioner
- Cold-start bulletin repair or engine software update
- Replace manual transmission with used or rebuilt unit
- Repair brake shift interlock or brake light switch
- Replace alternator
- Diagnose anti-theft system and program keys
- Replace heater core
- Replace front brake pads and rotors
- Replace front wheel bearing
- Power steering bulletin repair or fluid service
- Reseal door water shield
- Replace coolant temperature sender
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free recall repair at a Ford or Lincoln-Mercury dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…