Your 1999 Oldsmobile Bravadaproblems, repair costs and recalls
What we've documented about the 1999 Oldsmobile Bravada: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1999 Oldsmobile Bravada
6 documented issues apply to 1999, most serious first.
Transmission slips, drops into neutral or shifts hard
- What you'll notice
- Slipping or flaring revs between gears, the transmission suddenly acting like it is in neutral, harsh shifts from Park into Drive or Reverse (worse when cold), or fluid leaks.
- Why it happens
- The Bravada uses GM's 4L60-E four-speed automatic. Automatic transmission complaints are the most common powertrain problem across these years, and GM issued a bulletin for harsh engagement on later models.
- What to do
- Check the fluid level and condition. If it slips or loses drive, avoid highway driving and have a transmission shop diagnose it before it fails completely.
Intake manifold gaskets leak coolant
- What you'll notice
- Coolant level dropping with no visible leak, a sweet smell, the engine running hot, a low coolant light, or misfires and rough running.
- Why it happens
- The original intake manifold gaskets on the 4.3L Vortec V6 have a plastic core that breaks down with heat cycles, often from about 50,000 miles. Coolant can leak outside or into the engine oil.
- What to do
- Don't keep topping off coolant without finding the leak. Check the oil for a milky look. Have the gaskets replaced with updated metal-core gaskets before the engine overheats.
Spider fuel injector leaks or misfires
- What you'll notice
- Long cranking before it starts, rough idle and stumbling at low speed that smooths out at higher rpm, a fuel smell, and misfire codes.
- Why it happens
- The 4.3L uses a central "spider" injector assembly that can leak at its pressure regulator and lines, flooding cylinders with fuel.
- What to do
- Have fuel pressure tested and the misfire codes checked. Replace the injector assembly if it is leaking; a fuel leak under the intake is also a fire risk.
Misfire from a worn distributor cap and rotor
- What you'll notice
- The check engine light with misfire codes (P0300 to P0306), shaking at idle, weak acceleration, or slow starts.
- Why it happens
- The plastic distributor cap on the 4.3L sits in a hot spot and warps, wearing the rotor and its bushing.
- What to do
- A new cap and rotor are inexpensive and often the first thing to check for misfires on this engine.
Rough idle or stalling from the idle control valve or throttle sensor
- What you'll notice
- Rough or surging idle, stalling at stops, hesitation, or code P0122.
- Why it happens
- The idle air control valve clogs with deposits and the throttle position sensor wears out on the 4.3L.
- What to do
- Have the throttle body cleaned and the sensors tested. Stalling in traffic is a safety risk, so don't put it off.
AWD shudder or clunk in tight turns
- What you'll notice
- A shudder, binding or clunk when turning sharply at low speed on dry pavement, or AWD warning lights.
- Why it happens
- The full-time AWD transfer case can shudder. GM issued bulletins for transfer case shudder and low-speed turning vibration, and NHTSA complaints mention the transfer case.
- What to do
- Make sure all four tires are the same size and evenly worn. Have the transfer case fluid changed and the unit checked.
Repair prices for your 1999 Oldsmobile Bravada
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Transmission fluid and filter service as a first step
- Replace intake manifold gaskets with updated metal-core gaskets
- Replace central (spider) fuel injector assembly
- Replace distributor cap and rotor
- Clean throttle body and replace idle air control valve
- Transfer case fluid change
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…