Your 2018 Subaru Crosstrekproblems, repair costs and recalls
What we've documented about the 2018 Subaru Crosstrek: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2018 Subaru Crosstrek
3 documented issues apply to 2018, most serious first.
Engine computer can overheat an ignition coil and stall the engine
- What you'll notice
- The engine suddenly loses power or stalls while driving, will not restart, or the check engine light comes on with a misfire.
- Why it happens
- The engine computer can keep feeding power to an ignition coil after the engine is switched off. The coil overheats, can short out and blow a fuse, and the engine then shuts down.
- What to do
- Check the VIN for recalls 19V743 and 21V264 and have them done promptly. If the engine stalls or misfires, have the car towed to a dealer instead of driving it.
PCV valve can break apart and send pieces into the engine
- What you'll notice
- Blue or white smoke from the tailpipe, oil level dropping quickly, or a sudden loss of power.
- Why it happens
- The small crankcase ventilation valve on the engine can come apart. Pieces can be drawn into the engine, and oil gets pulled in and burned, which can end in engine damage.
- What to do
- Check the VIN for recall 19V744 (or 19V856 on some 2019 cars). If you see heavy smoke or lose power, pull over, shut the engine off and have it towed.
Rear stabilizer bar bracket bolts can work loose
- What you'll notice
- A clunk or rattle from the rear of the car over bumps, or more body lean than usual in turns.
- Why it happens
- The bolts holding the rear stabilizer bar brackets may not stay tight. A loose bracket can let the bar shift or come free.
- What to do
- Check the VIN for recall 21V263 and have the bolts replaced and tightened. Have any new rear-end clunk looked at soon.
Repair prices for your 2018 Subaru Crosstrek
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Reprogram engine computer and replace ignition coil
- Replace PCV valve
- Replace and torque rear stabilizer bracket bolts
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…