Your 2008 Toyota Camryproblems, repair costs and recalls
What we've documented about the 2008 Toyota Camry: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2008 Toyota Camry
6 documented issues apply to 2008, most serious first.
Excessive oil consumption
- What you'll notice
- Oil level drops quickly between changes, low-oil warning, blue-tinted exhaust smoke.
- Why it happens
- The piston rings can clog and let oil burn in the cylinders. Toyota ran a warranty enhancement program (ZE7) for it, which has since expired.
- What to do
- Check the oil at every fill-up and top it off. Do not keep driving with low oil; a shop can confirm with an oil consumption test and discuss a piston and ring repair.
Driver's power window switch can overheat (recall)
- What you'll notice
- Window switch that works on and off, feels sticky or hot, or a burning or melting smell from the driver's door.
- Why it happens
- Uneven lubrication inside the master window switch could make it overheat and melt, creating a fire risk. Toyota recalled the switch.
- What to do
- Check the VIN for open recalls. If you smell burning or see smoke from the door, stop using the switch and have it repaired right away.
Accelerator pedal can be trapped by floor mat (recall)
- What you'll notice
- Gas pedal stays down or the car keeps accelerating after you lift your foot.
- Why it happens
- An unsecured or wrong floor mat could catch the gas pedal. Toyota reshaped the pedal, replaced mats and added brake-override software under recall.
- What to do
- Check the VIN for open recalls and use only a properly secured, correct mat. If the pedal sticks, brake firmly, shift to Neutral and stop safely.
VVT-i oil hose leak
- What you'll notice
- Sudden oil leak at the front of the engine, oil pressure warning light, and abnormal engine noise.
- Why it happens
- The rubber section of the oil hose that feeds the variable valve timing system can break down with age and burst. Toyota ran a service campaign to replace it with a redesigned hose.
- What to do
- If the oil light comes on, pull over and shut the engine off. Have a dealer check whether the updated line was installed.
Hybrid brake actuator or brake control unit failure
- What you'll notice
- Brake and ABS warning lights and a change in how the brakes feel.
- Why it happens
- The hybrid's electronic brake actuator and its control unit and pedal sensor can fail. Toyota extended coverage on these parts with a warranty enhancement program (ZE1).
- What to do
- Have the brakes checked promptly when the brake warning lights come on, and ask a dealer about the extended coverage.
Sticky, melting or cracked dashboard
- What you'll notice
- The dash top turns shiny and tacky, gives off glare on the windshield, or cracks.
- Why it happens
- The dashboard material breaks down with heat and humidity. Toyota offered a warranty enhancement program (ZE6) for cracked or sticky dashboards.
- What to do
- Mostly cosmetic, but glare can hurt visibility. Ask a dealer whether any coverage still applies; a dash cover is a simple fix.
Repair prices for your 2008 Toyota Camry
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace pistons and rings
- Replace upper dashboard panel
- Replace driver's master window switch
- Modify or replace accelerator pedal and fit correct mats
- Replace rubber VVT-i oil hose with updated metal line
- Replace hybrid brake actuator and bleed brakes
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…