Your 2016 Toyota Miraiproblems, repair costs and recalls
What we've documented about the 2016 Toyota Mirai: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2016 Toyota Mirai
4 documented issues apply to 2016, most serious first.
Hard to refuel: hydrogen stations closed, broken or out of fuel
- What you'll notice
- You can't find a working hydrogen station nearby, stations are closed for repair or out of hydrogen, pumps won't take payment or stop mid-fill, and there can be long lines. Some owners have run out of fuel and needed a tow.
- Why it happens
- The Mirai can only refuel at hydrogen stations, and there are few of them, almost all in California. Supply shortages, station breakdowns and rising hydrogen prices have hit owners hard, and Mirai owners have sued Toyota over it.
- What to do
- Check a live station-status app before every trip and don't let the tank run low. Keep a backup plan for longer drives. If you're thinking of buying one, make sure a reliable station is close to home and work.
"FC malfunction" warning with code P1DEF
- What you'll notice
- A message says "FC malfunction, return vehicle to dealer for service," and code P1DEF (fuel cell stack performance) is stored. Power may be reduced.
- Why it happens
- The fuel control module's settings could flag the fuel cell stack as underperforming. Toyota revised the fuel control module calibration in a service bulletin.
- What to do
- Have a Toyota dealer certified for fuel cell vehicles check it. The calibration update is covered, and key fuel cell parts carry an 8-year/100,000-mile warranty.
Fueling problems from a lost nozzle O-ring
- What you'll notice
- The car won't fill properly or the fill stops early, and the station may show a fueling fault. The rubber O-ring on the car's hydrogen fill port can come off during fueling.
- Why it happens
- Toyota found that some fueling sessions could pull off the 35 MPa O-ring on the Mirai's hydrogen receptacle, which affects the seal with the station nozzle.
- What to do
- If fills keep failing at more than one station, have a Toyota fuel cell dealer inspect the fill receptacle and O-ring.
Chirping noise from the rear at certain speeds
- What you'll notice
- A high-pitched chirp from the back of the car that shows up only at certain speeds.
- Why it happens
- Toyota issued a bulletin (T-SB-0286-17) for this rear chirp noise on some 2016-2017 cars, filed under the fuel system.
- What to do
- Point out the noise and the speed it happens at to a Toyota dealer and ask about bulletin T-SB-0286-17.
Repair prices for your 2016 Toyota Mirai
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Fuel control module calibration update
- Inspect hydrogen fill receptacle and replace O-ring
- Noise diagnosis and bulletin repair
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…