P0214 Cold Start Injector 2
What it means
Some older engines used an extra injector to add fuel during cold starts. The computer sees a problem with cold start injector 2 or its wiring.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the cold start injector connector and wiring
- Measure the injector's resistance against the spec
- Test the thermo-time switch if the engine has one
Signs you may notice
- Check engine light on
- Hard starting when the engine is cold
- Fuel smell or rough running if the injector leaks
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty cold start injector
- CommonDamaged wiring or corroded connector
- PossibleFaulty thermo-time switch that controls the injector
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a wiring repair or a new cold start injector.
Common questions
What does P0214 mean?
Some older engines used an extra injector to add fuel during cold starts. The computer sees a problem with cold start injector 2 or its wiring.
Can I drive with code P0214?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0214?
Common possibilities to test include: faulty cold start injector; damaged wiring or corroded connector; faulty thermo-time switch that controls the injector; engine computer fault. A shop should confirm the cause before replacing parts.