P0235 Turbocharger/Supercharger Boost Sensor "A" Circuit
What it means
The boost sensor tells the computer how much pressure the turbo or supercharger is making. The computer sees a problem in this sensor's circuit.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the sensor connector and wiring for damage or oil contamination
- With the engine off, compare the boost sensor reading with barometric pressure
- Check the boost hoses and intercooler pipes for leaks
Signs you may notice
- Check engine light on
- Reduced power or limp mode
- Sluggish or hesitant acceleration
- Possible black smoke on diesels
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty boost pressure sensor "A"
- CommonLoose or corroded sensor connector
- CommonDamaged wiring between the sensor and computer
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new boost pressure sensor or a wiring or connector repair. On diesels, cleaning a soot-clogged sensor or port sometimes fixes it.
Common questions
What does P0235 mean?
The boost sensor tells the computer how much pressure the turbo or supercharger is making. The computer sees a problem in this sensor's circuit.
Can I drive with code P0235?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0235?
Common possibilities to test include: faulty boost pressure sensor "a"; loose or corroded sensor connector; damaged wiring between the sensor and computer; engine computer fault. A shop should confirm the cause before replacing parts.