Home › Code lookup › P0236
Powertrain code · Fuel and air

P0236 Turbocharger/Supercharger Boost Sensor "A" Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its reading doesn't make sense for how the engine is running.

Can I keep driving?

You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.

What to test before replacing parts

Compare the sensor reading with barometric pressure with the engine off, check for boost leaks and a clogged sensor port, and inspect the wiring before replacing the sensor.

  1. Inspect the sensor connector and wiring for damage or oil contamination
  2. With the engine off, compare the boost sensor reading with barometric pressure
  3. Check the boost hoses and intercooler pipes for leaks

Signs you may notice

  • Check engine light on
  • Reduced power or limp mode
  • Sluggish or hesitant acceleration
  • Possible black smoke on diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty boost pressure sensor "A"
  • CommonLeaking or cracked boost hose or intercooler pipe
  • CommonSensor port or hose clogged with oil or soot
  • CommonLoose or corroded sensor connector
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new boost pressure sensor or a wiring or connector repair. On diesels, cleaning a soot-clogged sensor or port sometimes fixes it.

Repair costInsufficient verified pricing for this vehicle and repair
Replace boost pressure sensor. Prepare an itemized shop request.
Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0236 mean?

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its reading doesn't make sense for how the engine is running.

Can I drive with code P0236?

You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.

What causes P0236?

Common possibilities to test include: faulty boost pressure sensor "a"; leaking or cracked boost hose or intercooler pipe; sensor port or hose clogged with oil or soot; loose or corroded sensor connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.