P0237 Turbocharger/Supercharger Boost Sensor "A" Circuit Low
What it means
The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its signal voltage is lower than it should ever be.
Can I keep driving?
You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.
What to test before replacing parts
Check the sensor's 5-volt reference, ground and signal at the connector for an open or short to ground, and compare the engine-off reading with barometric pressure before replacing parts.
- Inspect the sensor connector and wiring for damage or oil contamination
- With the engine off, compare the boost sensor reading with barometric pressure
- Check the boost hoses and intercooler pipes for leaks
Signs you may notice
- Check engine light on
- Reduced power or limp mode
- Sluggish or hesitant acceleration
- Possible black smoke on diesels
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty boost pressure sensor "A"
- CommonOpen in the 5-volt reference wire or signal shorted to ground
- CommonLoose or corroded sensor connector
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new boost pressure sensor or a wiring or connector repair. On diesels, cleaning a soot-clogged sensor or port sometimes fixes it.
Common questions
What does P0237 mean?
The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its signal voltage is lower than it should ever be.
Can I drive with code P0237?
You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.
What causes P0237?
Common possibilities to test include: faulty boost pressure sensor "a"; open in the 5-volt reference wire or signal shorted to ground; loose or corroded sensor connector; engine computer fault. A shop should confirm the cause before replacing parts.