Home › Code lookup › P0238
Powertrain code · Fuel and air

P0238 Turbocharger/Supercharger Boost Sensor "A" Circuit High

How urgent? Get it checked in the next few days

What it means

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its signal voltage is higher than it should ever be.

Can I keep driving?

You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.

What to test before replacing parts

Check the sensor's ground and signal wires for an open or short to voltage, inspect the connector, and compare the engine-off reading with barometric pressure before replacing parts.

  1. Inspect the sensor connector and wiring for damage or oil contamination
  2. With the engine off, compare the boost sensor reading with barometric pressure
  3. Check the boost hoses and intercooler pipes for leaks

Signs you may notice

  • Check engine light on
  • Reduced power or limp mode
  • Sluggish or hesitant acceleration
  • Possible black smoke on diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty boost pressure sensor "A"
  • CommonOpen ground wire or signal shorted to voltage
  • CommonLoose or corroded sensor connector
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new boost pressure sensor or a wiring or connector repair. On diesels, cleaning a soot-clogged sensor or port sometimes fixes it.

Repair costInsufficient verified pricing for this vehicle and repair
Replace boost pressure sensor. Prepare an itemized shop request.
Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0238 mean?

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its signal voltage is higher than it should ever be.

Can I drive with code P0238?

You can usually drive gently to a shop soon, but expect reduced power or limp mode, so avoid highways and merging if power drops. If you hear knocking, see heavy smoke or the engine suddenly loses power, pull over and get it checked before driving on.

What causes P0238?

Common possibilities to test include: faulty boost pressure sensor "a"; open ground wire or signal shorted to voltage; loose or corroded sensor connector; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.