Home › Code lookup › P023B
Powertrain code · Fuel and air

P023B Charge Air Cooler Coolant Pump Control Circuit Low

How urgent? Book a check when convenient

What it means

Some turbo and supercharged engines use an electric pump to send coolant through the intercooler. The pump's control circuit reads lower than expected, often from a short to ground.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the pump fuse and relay
  2. Inspect the pump connector and wiring
  3. Command the pump on with a scan tool and feel or listen for it running

Signs you may notice

  • Check engine light on
  • Reduced power in hot weather or hard driving
  • Often no other noticeable change

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed intercooler coolant pump
  • CommonDamaged wiring or corroded pump connector
  • PossibleBlown fuse or bad relay
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new intercooler coolant pump or a wiring repair.

Common questions

What does P023B mean?

Some turbo and supercharged engines use an electric pump to send coolant through the intercooler. The pump's control circuit reads lower than expected, often from a short to ground.

Can I drive with code P023B?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P023B?

Common possibilities to test include: failed intercooler coolant pump; damaged wiring or corroded pump connector; blown fuse or bad relay; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.