P023E Manifold Absolute Pressure - Turbocharger/Supercharger Boost Sensor "B" Correlation
What it means
The computer compares the intake manifold pressure sensor with boost sensor B. When the engine isn't making boost they should read about the same, and here they don't.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- With the engine off, compare both sensor readings with barometric pressure
- Inspect both sensors' connectors, hoses and ports for leaks or clogging
Signs you may notice
- Check engine light on
- Reduced power or limp mode
- Hesitation when accelerating
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty boost pressure sensor
- CommonFaulty manifold absolute pressure (MAP) sensor
- PossibleLeaking, cracked or clogged sensor hoses or ports
- PossibleWiring or connector problem at either sensor
Typical repair once the cause is confirmed
Usually replacing whichever sensor reads wrong when compared with barometric pressure.
Common questions
What does P023E mean?
The computer compares the intake manifold pressure sensor with boost sensor B. When the engine isn't making boost they should read about the same, and here they don't.
Can I drive with code P023E?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P023E?
Common possibilities to test include: faulty boost pressure sensor; faulty manifold absolute pressure (map) sensor; leaking, cracked or clogged sensor hoses or ports; wiring or connector problem at either sensor. A shop should confirm the cause before replacing parts.