Home › Code lookup › P0240
Powertrain code · Fuel and air

P0240 Turbocharger/Supercharger Boost Sensor "B" Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its reading doesn't make sense for how the engine is running.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring for damage or oil contamination
  2. With the engine off, compare the boost sensor reading with barometric pressure
  3. Check the boost hoses and intercooler pipes for leaks

Signs you may notice

  • Check engine light on
  • Reduced power or limp mode
  • Sluggish or hesitant acceleration
  • Possible black smoke on diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty boost pressure sensor "B"
  • CommonLeaking or cracked boost hose or intercooler pipe
  • CommonSensor port or hose clogged with oil or soot
  • CommonLoose or corroded sensor connector
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new boost pressure sensor or a wiring or connector repair. On diesels, cleaning a soot-clogged sensor or port sometimes fixes it.

Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0240 mean?

The boost sensor tells the computer how much pressure the turbo or supercharger is making. Its reading doesn't make sense for how the engine is running.

Can I drive with code P0240?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0240?

Common possibilities to test include: faulty boost pressure sensor "b"; leaking or cracked boost hose or intercooler pipe; sensor port or hose clogged with oil or soot; loose or corroded sensor connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.