P0243 Turbocharger/Supercharger Wastegate Solenoid "A"
What it means
The wastegate solenoid helps control how much boost the turbo makes. The computer sees a problem in this solenoid's circuit.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the solenoid connector, wiring and vacuum hoses
- Check the solenoid's resistance and command it with a scan tool
Signs you may notice
- Check engine light on
- Low power or limp mode
- Boost may surge or feel too strong at times
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty wastegate (boost control) solenoid
- CommonDamaged wiring or corroded connector
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new wastegate control solenoid or a wiring or hose repair.
Known on these vehicles
Common questions
What does P0243 mean?
The wastegate solenoid helps control how much boost the turbo makes. The computer sees a problem in this solenoid's circuit.
Can I drive with code P0243?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0243?
Common possibilities to test include: faulty wastegate (boost control) solenoid; damaged wiring or corroded connector; engine computer fault. A shop should confirm the cause before replacing parts.