Home › Code lookup › P024A
Powertrain code · Fuel and air

P024A Charge Air Cooler Bypass Control "A" Range/Performance

How urgent? Book a check when convenient

What it means

Some turbo engines, mostly diesels, have a valve that can route intake air around the intercooler, for example to warm up faster. Bypass valve A isn't moving to the position the computer asks for.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the bypass valve connector and wiring
  2. Command the valve with a scan tool and watch whether it moves

Signs you may notice

  • Check engine light on
  • Often no noticeable change in how it drives
  • Possibly reduced power or slower warm-up

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonBypass valve sticking from soot or carbon buildup
  • CommonFaulty bypass valve actuator
  • PossibleWiring or connector problem
  • PossibleFaulty bypass position sensor

Typical repair once the cause is confirmed

Usually cleaning or replacing the bypass valve and actuator.

Common questions

What does P024A mean?

Some turbo engines, mostly diesels, have a valve that can route intake air around the intercooler, for example to warm up faster. Bypass valve A isn't moving to the position the computer asks for.

Can I drive with code P024A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P024A?

Common possibilities to test include: bypass valve sticking from soot or carbon buildup; faulty bypass valve actuator; wiring or connector problem; faulty bypass position sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.