P0264 Cylinder 2 Injector Circuit Low
What it means
The computer sees lower-than-expected voltage in the cylinder 2 fuel injector circuit. This usually points to a short to ground or a bad injector.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the injector's resistance and compare it with the other injectors
- Inspect the injector wiring for rubbing or melted insulation
Signs you may notice
- Check engine light on
- Rough idle or shaking
- Misfire, often with a cylinder 2 misfire code
- Less power and worse fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonShorted coil in the cylinder 2 injector
- CommonInjector wire shorted to ground
- PossibleCorroded or damaged injector connector
- PossibleFaulty injector driver in the engine computer
Typical repair once the cause is confirmed
Usually a new injector or a wiring repair.
Common questions
What does P0264 mean?
The computer sees lower-than-expected voltage in the cylinder 2 fuel injector circuit. This usually points to a short to ground or a bad injector.
Can I drive with code P0264?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0264?
Common possibilities to test include: shorted coil in the cylinder 2 injector; injector wire shorted to ground; corroded or damaged injector connector; faulty injector driver in the engine computer. A shop should confirm the cause before replacing parts.