P0275 Cylinder 5 Contribution/Balance
What it means
The computer compares how much each cylinder helps spin the engine. Cylinder 5 is doing noticeably more or less work than the others.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Run a cylinder balance or contribution test with a scan tool
- Do a compression test on that cylinder
- Inspect the injector connector and wiring
Signs you may notice
- Check engine light on
- Rough idle, misfire or knocking
- Extra smoke from the exhaust on diesels
- Less power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWeak, leaking or clogged injector on cylinder 5
- PossibleLow compression in that cylinder
- PossibleInjector wiring or connector problem
- PossibleIgnition problem on that cylinder (gas engines)
Typical repair once the cause is confirmed
Most often a new injector for that cylinder. A compression problem means deeper engine repair.
Common questions
What does P0275 mean?
The computer compares how much each cylinder helps spin the engine. Cylinder 5 is doing noticeably more or less work than the others.
Can I drive with code P0275?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0275?
Common possibilities to test include: weak, leaking or clogged injector on cylinder 5; low compression in that cylinder; injector wiring or connector problem; ignition problem on that cylinder (gas engines). A shop should confirm the cause before replacing parts.