P029A Cylinder 1 - Fuel Trim at Max Limit
What it means
The computer is adding as much fuel as it's allowed to on cylinder 1, and that cylinder still seems to run lean (short on fuel).
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for other fuel trim, misfire or fuel pressure codes
- Have the cylinder 1 injector flow or balance tested
Signs you may notice
- Check engine light on
- Rough idle or misfire
- Hesitation or less power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonClogged or restricted cylinder 1 injector
- CommonVacuum leak near that cylinder's intake port
- PossibleLow fuel pressure
- PossibleInjector wiring or connector problem
Typical repair once the cause is confirmed
Usually cleaning or replacing the injector, or fixing a vacuum leak near that cylinder.
Common questions
What does P029A mean?
The computer is adding as much fuel as it's allowed to on cylinder 1, and that cylinder still seems to run lean (short on fuel).
Can I drive with code P029A?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P029A?
Common possibilities to test include: clogged or restricted cylinder 1 injector; vacuum leak near that cylinder's intake port; low fuel pressure; injector wiring or connector problem. A shop should confirm the cause before replacing parts.