P029D Cylinder 1 - Injector Leaking
What it means
The computer thinks the cylinder 1 injector is letting fuel through when it should be shut.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for other fuel trim, misfire or fuel pressure codes
- Have the cylinder 1 injector flow or balance tested
Signs you may notice
- Check engine light on
- Rough idle or misfire
- Hard starting, fuel smell or black smoke
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn or stuck-open injector
- PossibleDebris holding the injector partly open
- PossibleFuel pressure too high
Typical repair once the cause is confirmed
Usually a new injector for that cylinder. Fix it soon, since raw fuel can thin the oil and damage the catalytic converter.
Common questions
What does P029D mean?
The computer thinks the cylinder 1 injector is letting fuel through when it should be shut.
Can I drive with code P029D?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P029D?
Common possibilities to test include: worn or stuck-open injector; debris holding the injector partly open; fuel pressure too high. A shop should confirm the cause before replacing parts.