Home › Code lookup › P050E
Powertrain code · Emissions

P050E Cold Start Engine Exhaust Temperature Too Low

How urgent? Book a check when convenient

What it means

After a cold start the exhaust did not heat up as fast as the computer expected, so the catalytic converter may be slow to start working.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for other cold start, idle or thermostat codes
  2. Look for a manufacturer service bulletin or software update

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCold start idle or timing strategy not working (dirty throttle body or vacuum leak)
  • CommonEngine computer software needing an update
  • PossibleThermostat stuck open
  • PossibleExhaust leak near the front of the exhaust

Typical repair once the cause is confirmed

Repair any idle or thermostat problem; some vehicles need a computer software update.

Common questions

What does P050E mean?

After a cold start the exhaust did not heat up as fast as the computer expected, so the catalytic converter may be slow to start working.

Can I drive with code P050E?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P050E?

Common possibilities to test include: cold start idle or timing strategy not working (dirty throttle body or vacuum leak); engine computer software needing an update; thermostat stuck open; exhaust leak near the front of the exhaust. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.