Home › Code lookup › P050F
Powertrain code · Brakes

P050F Brake Assist Vacuum Too Low

How urgent? Get it checked in the next few days

What it means

The computer sees too little vacuum in the brake booster, so the brakes may take more effort to stop the car.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the booster vacuum hose and check valve
  2. Check booster vacuum with a gauge
  3. Listen for hissing at the booster with the engine running

Signs you may notice

  • Hard brake pedal that needs more push
  • Hissing sound near the brake pedal or booster
  • Check engine or brake warning light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCracked or disconnected brake booster vacuum hose
  • CommonFaulty booster check valve
  • PossibleLeaking brake booster
  • PossibleWeak engine vacuum pump (on engines that use one)
  • PossibleFaulty booster vacuum sensor

Typical repair once the cause is confirmed

Usually a vacuum hose or check valve; a new brake booster or vacuum pump if those test bad.

Walk through it step by step: Hard brake pedal →

Common questions

What does P050F mean?

The computer sees too little vacuum in the brake booster, so the brakes may take more effort to stop the car.

Can I drive with code P050F?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P050F?

Common possibilities to test include: cracked or disconnected brake booster vacuum hose; faulty booster check valve; leaking brake booster; weak engine vacuum pump (on engines that use one). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.