P0512 Starter Request Circuit
What it means
The signal that asks the computer to crank the engine, from the key or start button, is not behaving as expected.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Try starting in Neutral or with the clutch fully pressed
- Check the start signal on a scan tool while turning the key or pressing the button
Signs you may notice
- Engine may not crank, or cranks only sometimes
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty ignition switch or start button
- CommonFaulty clutch or neutral safety switch
- PossibleWiring or connector problem in the start circuit
- PossibleFaulty starter relay
Typical repair once the cause is confirmed
Usually an ignition switch, start button, safety switch or wiring repair.
Common questions
What does P0512 mean?
The signal that asks the computer to crank the engine, from the key or start button, is not behaving as expected.
Can I drive with code P0512?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0512?
Common possibilities to test include: faulty ignition switch or start button; faulty clutch or neutral safety switch; wiring or connector problem in the start circuit; faulty starter relay. A shop should confirm the cause before replacing parts.