Home › Code lookup › P0514
Powertrain code · Electrical

P0514 Battery Temperature Sensor Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The battery temperature sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part helps the computer adjust charging voltage to the battery temperature.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the battery temperature sensor reading on a scan tool with real conditions
  2. Make sure the sensor is clipped in place at the battery
  3. Inspect the wiring and connector for damage or corrosion

Signs you may notice

  • Check engine light on
  • Battery may be undercharged or overcharged

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty or sluggish battery temperature sensor
  • CommonSensor not seated against the battery after a battery replacement
  • PossibleWiring or connector problem skewing the reading
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a new battery temperature sensor or repair of the underlying problem, after ruling out wiring.

Walk through it step by step: Battery light on →

Common questions

What does P0514 mean?

The battery temperature sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part helps the computer adjust charging voltage to the battery temperature.

Can I drive with code P0514?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0514?

Common possibilities to test include: faulty or sluggish battery temperature sensor; sensor not seated against the battery after a battery replacement; wiring or connector problem skewing the reading; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.