P0518 Idle Air Control Circuit Intermittent
What it means
The circuit that controls the idle air control valve is cutting in and out.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle the harness while watching idle speed
- Inspect the connector pins for corrosion
Signs you may notice
- Idle speed that surges or drops at random
- Occasional stalling
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector at the idle air control valve
- CommonChafed wiring
- PossibleFailing idle air control valve
Typical repair once the cause is confirmed
Usually a connector or wiring repair, or a new idle air control valve.
Common questions
What does P0518 mean?
The circuit that controls the idle air control valve is cutting in and out.
Can I drive with code P0518?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0518?
Common possibilities to test include: loose or corroded connector at the idle air control valve; chafed wiring; failing idle air control valve. A shop should confirm the cause before replacing parts.