Home › Code lookup › P0519
Powertrain code · Speed and idle control

P0519 Idle Air Control System Performance

How urgent? Get it checked in the next few days

What it means

The idle speed isn't responding properly when the computer adjusts the idle air control system.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Clean the throttle body and idle passages
  2. Check for vacuum leaks
  3. Perform an idle relearn

Signs you may notice

  • Unstable, high or low idle
  • Stalling when coming to a stop
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDirty throttle body or idle air passages
  • CommonVacuum leak
  • PossibleFaulty idle air control valve or electronic throttle body
  • PossibleIdle relearn needed

Typical repair once the cause is confirmed

Usually a throttle body cleaning or vacuum leak repair, then an idle relearn.

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0519 mean?

The idle speed isn't responding properly when the computer adjusts the idle air control system.

Can I drive with code P0519?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0519?

Common possibilities to test include: dirty throttle body or idle air passages; vacuum leak; faulty idle air control valve or electronic throttle body; idle relearn needed. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.