Home › Code lookup › P051A
Powertrain code · Engine

P051A Crankcase Pressure Sensor Circuit

How urgent? Book a check when convenient

What it means

The computer has spotted a problem in the wiring circuit for the crankcase pressure sensor. This part monitors pressure inside the engine crankcase to check the PCV system.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the crankcase pressure sensor wiring and connector for damage, corrosion or a loose fit
  2. Check related fuses and confirm power and ground at the sensor

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty crankcase pressure sensor
  • CommonDamaged wiring or a loose or corroded connector
  • PossibleBlown fuse or missing power or ground to the sensor
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new crankcase pressure sensor if it tests bad.

Common questions

What does P051A mean?

The computer has spotted a problem in the wiring circuit for the crankcase pressure sensor. This part monitors pressure inside the engine crankcase to check the PCV system.

Can I drive with code P051A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P051A?

Common possibilities to test include: faulty crankcase pressure sensor; damaged wiring or a loose or corroded connector; blown fuse or missing power or ground to the sensor; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.