Home › Code lookup › P051B
Powertrain code · Engine

P051B Crankcase Pressure Sensor Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The crankcase pressure sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part monitors pressure inside the engine crankcase to check the PCV system.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the crankcase pressure sensor reading on a scan tool with real conditions
  2. Inspect the PCV valve, oil separator and hoses
  3. Inspect the wiring and connector for damage or corrosion

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty or sluggish crankcase pressure sensor
  • CommonClogged, cracked or disconnected PCV hose or valve
  • PossibleWiring or connector problem skewing the reading
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a new crankcase pressure sensor or repair of the underlying problem, after ruling out wiring.

Known on these vehicles

Common questions

What does P051B mean?

The crankcase pressure sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part monitors pressure inside the engine crankcase to check the PCV system.

Can I drive with code P051B?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P051B?

Common possibilities to test include: faulty or sluggish crankcase pressure sensor; clogged, cracked or disconnected pcv hose or valve; wiring or connector problem skewing the reading; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.