P0522 Engine Oil Pressure Sensor/Switch Low Voltage
What it means
The oil pressure sensor signal voltage is lower than it should ever be, which usually means a wiring short or a failed sensor.
Can I keep driving?
Check the oil level as soon as you can safely stop. If the oil pressure light is on, the oil is low or you hear ticking or knocking, shut the engine off and don't drive; low oil pressure can wreck an engine in minutes. If the oil is full and the engine sounds normal, get it checked soon.
What to test before replacing parts
Check the sensor's reference voltage and signal wire for a short to ground, inspect the connector, and confirm real oil pressure with a mechanical gauge before replacing the sensor.
- Check the oil level first
- Confirm real oil pressure with a mechanical gauge
- Check reference voltage and ground at the sensor connector
Signs you may notice
- Oil pressure gauge reads zero, maxed out or jumps around
- Oil pressure light on or flickering
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty oil pressure sensor
- CommonSignal wire shorted to ground
- PossibleOil-soaked or corroded connector
- PossibleProblem with the sensor's reference voltage supply
- PossibleVery low real oil pressure
Typical repair once the cause is confirmed
Usually a new oil pressure sensor or a wiring repair.
Known on these vehicles
Common questions
What does P0522 mean?
The oil pressure sensor signal voltage is lower than it should ever be, which usually means a wiring short or a failed sensor.
Can I drive with code P0522?
Check the oil level as soon as you can safely stop. If the oil pressure light is on, the oil is low or you hear ticking or knocking, shut the engine off and don't drive; low oil pressure can wreck an engine in minutes. If the oil is full and the engine sounds normal, get it checked soon.
What causes P0522?
Common possibilities to test include: faulty oil pressure sensor; signal wire shorted to ground; oil-soaked or corroded connector; problem with the sensor's reference voltage supply. A shop should confirm the cause before replacing parts.