Home › Code lookup › P0550
Powertrain code · Steering and suspension

P0550 Power Steering Pressure Sensor/Switch Circuit

How urgent? Book a check when convenient

What it means

The computer has spotted a problem in the wiring circuit for the power steering pressure sensor. This part tells the computer when steering effort rises so it can bump the idle and avoid stalling.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the power steering pressure sensor wiring and connector for damage, corrosion or a loose fit
  2. Check related fuses and confirm power and ground at the sensor

Signs you may notice

  • Check engine light on
  • Idle may dip or the engine may stall when turning the wheel at low speed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty power steering pressure sensor
  • CommonDamaged wiring or a loose or corroded connector
  • PossibleBlown fuse or missing power or ground to the sensor
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new power steering pressure sensor if it tests bad.

Common questions

What does P0550 mean?

The computer has spotted a problem in the wiring circuit for the power steering pressure sensor. This part tells the computer when steering effort rises so it can bump the idle and avoid stalling.

Can I drive with code P0550?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0550?

Common possibilities to test include: faulty power steering pressure sensor; damaged wiring or a loose or corroded connector; blown fuse or missing power or ground to the sensor; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.