Home › Code lookup › P0554
Powertrain code · Steering and suspension

P0554 Power Steering Pressure Sensor/Switch Circuit Intermittent

How urgent? Book a check when convenient

What it means

The signal from the power steering pressure sensor keeps cutting in and out or jumping around. This part tells the computer when steering effort rises so it can bump the idle and avoid stalling.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Wiggle the harness and connector while watching live data on a scan tool
  2. Look for chafed wires near hot or moving parts

Signs you may notice

  • Check engine light on
  • Idle may dip or the engine may stall when turning the wheel at low speed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonChafed wiring that shorts or opens over bumps
  • PossibleFailing power steering pressure sensor

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new power steering pressure sensor if it tests bad.

Common questions

What does P0554 mean?

The signal from the power steering pressure sensor keeps cutting in and out or jumping around. This part tells the computer when steering effort rises so it can bump the idle and avoid stalling.

Can I drive with code P0554?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0554?

Common possibilities to test include: loose or corroded connector; chafed wiring that shorts or opens over bumps; failing power steering pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.