Home › Code lookup › P0556
Powertrain code · Brakes

P0556 Brake Booster Pressure Sensor Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The brake booster pressure sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part monitors vacuum in the brake booster that makes the brake pedal easy to push.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the brake booster pressure sensor reading on a scan tool with real conditions
  2. Inspect the booster vacuum hose and check valve
  3. Inspect the wiring and connector for damage or corrosion

Signs you may notice

  • Check engine light on
  • Brake pedal may feel harder if there is a real vacuum problem

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty or sluggish brake booster pressure sensor
  • CommonVacuum leak at the booster hose or check valve
  • PossibleWiring or connector problem skewing the reading
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a new brake booster pressure sensor or repair of the underlying problem, after ruling out wiring.

Walk through it step by step: Hard brake pedal →

Common questions

What does P0556 mean?

The brake booster pressure sensor is sending a reading that doesn't make sense or doesn't match other sensors. This part monitors vacuum in the brake booster that makes the brake pedal easy to push.

Can I drive with code P0556?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0556?

Common possibilities to test include: faulty or sluggish brake booster pressure sensor; vacuum leak at the booster hose or check valve; wiring or connector problem skewing the reading; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.