Home › Code lookup › P0559
Powertrain code · Brakes

P0559 Brake Booster Pressure Sensor Circuit Intermittent

How urgent? Get it checked in the next few days

What it means

The signal from the brake booster pressure sensor keeps cutting in and out or jumping around. This part monitors vacuum in the brake booster that makes the brake pedal easy to push.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Wiggle the harness and connector while watching live data on a scan tool
  2. Look for chafed wires near hot or moving parts

Signs you may notice

  • Check engine light on
  • Brake pedal may feel harder if there is a real vacuum problem

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonChafed wiring that shorts or opens over bumps
  • PossibleFailing brake booster pressure sensor

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new brake booster pressure sensor if it tests bad.

Walk through it step by step: Hard brake pedal →

Common questions

What does P0559 mean?

The signal from the brake booster pressure sensor keeps cutting in and out or jumping around. This part monitors vacuum in the brake booster that makes the brake pedal easy to push.

Can I drive with code P0559?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0559?

Common possibilities to test include: loose or corroded connector; chafed wiring that shorts or opens over bumps; failing brake booster pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.