Home › Code lookup › P0560
Powertrain code · Electrical

P0560 System Voltage

How urgent? Get it checked in the next few days

What it means

The computer sees the vehicle's electrical system voltage outside its normal range or missing at one of its inputs.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Test the battery and charging voltage
  2. Clean and tighten the battery terminals and engine grounds
  3. Check the fuse that powers the engine computer

Signs you may notice

  • Battery or charging warning light on
  • Dim or flickering lights
  • Slow cranking or no start
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWeak or failing battery
  • CommonLoose or corroded battery terminals or grounds
  • PossibleFailing alternator
  • PossibleBlown fuse feeding the engine computer

Typical repair once the cause is confirmed

Usually a battery, alternator, cable or ground repair.

Walk through it step by step: Battery light on →

Common questions

What does P0560 mean?

The computer sees the vehicle's electrical system voltage outside its normal range or missing at one of its inputs.

Can I drive with code P0560?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0560?

Common possibilities to test include: weak or failing battery; loose or corroded battery terminals or grounds; failing alternator; blown fuse feeding the engine computer. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.