Home › Code lookup › P0563
Powertrain code · Electrical

P0563 System Voltage High

How urgent? Get it checked in the next few days

What it means

The computer sees the vehicle's electrical voltage above normal, which can overcharge the battery and stress electronics.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Measure charging voltage with the engine running
  2. Check the alternator wiring and engine grounds

Signs you may notice

  • Battery warning light on
  • Very bright or flickering lights
  • Battery smelling of sulfur or swelling
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty alternator voltage regulator
  • CommonPoor battery voltage-sense connection or bad ground
  • PossibleFaulty battery current or temperature sensor
  • PossibleRecent jump start or battery charger hookup

Typical repair once the cause is confirmed

Usually a new alternator or voltage regulator, or a ground repair.

Repair costInsufficient verified pricing for this vehicle and repair
Walk through it step by step: Battery light on →

Common questions

What does P0563 mean?

The computer sees the vehicle's electrical voltage above normal, which can overcharge the battery and stress electronics.

Can I drive with code P0563?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0563?

Common possibilities to test include: faulty alternator voltage regulator; poor battery voltage-sense connection or bad ground; faulty battery current or temperature sensor; recent jump start or battery charger hookup. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.