Home › Code lookup › P0572
Powertrain code · Brakes

P0572 Brake Switch "A" Circuit Low

How urgent? Get it checked in the next few days

What it means

The brake pedal switch signal is stuck low, so the computer may not know when the brakes are applied.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the stop lamp fuse and that brake lights work
  2. Check the switch signal on a scan tool while pressing the pedal

Signs you may notice

  • Brake lights not working or staying on
  • Cruise control will not engage
  • Shifter may not come out of Park
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty brake light switch
  • CommonBlown stop lamp fuse
  • PossibleWire shorted to ground
  • PossibleMisadjusted switch

Typical repair once the cause is confirmed

Usually a new brake light switch or a fuse and wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace brake light switch. Prepare an itemized shop request.

Common questions

What does P0572 mean?

The brake pedal switch signal is stuck low, so the computer may not know when the brakes are applied.

Can I drive with code P0572?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0572?

Common possibilities to test include: faulty brake light switch; blown stop lamp fuse; wire shorted to ground; misadjusted switch. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.