Home › Code lookup › P0573
Powertrain code · Brakes

P0573 Brake Switch "A" Circuit High

How urgent? Get it checked in the next few days

What it means

The brake pedal switch signal is stuck high, so the computer may think the brakes are always applied.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check whether the brake lights stay on with the pedal released
  2. Look for a missing stopper pad on the brake pedal arm

Signs you may notice

  • Brake lights not working or staying on
  • Cruise control will not engage
  • Shifter may not come out of Park
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty or stuck brake light switch
  • CommonMisadjusted switch or broken pedal stopper pad
  • PossibleWire shorted to voltage

Typical repair once the cause is confirmed

Usually a new brake light switch or adjustment.

Repair costInsufficient verified pricing for this vehicle and repair
Replace brake light switch. Prepare an itemized shop request.

Common questions

What does P0573 mean?

The brake pedal switch signal is stuck high, so the computer may think the brakes are always applied.

Can I drive with code P0573?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0573?

Common possibilities to test include: faulty or stuck brake light switch; misadjusted switch or broken pedal stopper pad; wire shorted to voltage. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.